CSM-400-1224 - 10100BaseT(X) to 100BaseFX slide-in management module converter, WDM-A single-mo

Introduction
The CSM-400 Series consists of slide-in Ethernet-to-fiber managed media converters for the NRack System™. The modules provide media conversion from 10/100BaseT(X) to 100BaseFX (with SC/ST connectors), and can be installed in any NRack System™ chassis. The CSM-400 modules support LFP and FEF for easily tracing network link failures, and support store-and-forward and pass-through modes, 802.3AM OAM for remote management and monitoring, as well as WDM-type fiber modules to reduce fiber cable cost.

Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector): 1
- 100BaseFX Ports (multi-mode ST connector): CSM-400-1213: 1
- 100BaseFX Ports (multi-mode SC connector): CSM-400-1214: 1, CSM-400-1214-T: 1
- 100BaseFX Ports (single-mode SC connector): CSM-400-1218: 1, CSM-400-1218-T: 1
- 100BaseFX Ports, WDM-A Single-Mode SC Connector: CSM-400-1224: 1, CSM-400-1224-T: 1
- 100BaseFX Ports, WDM-B Single-Mode SC Connector: CSM-400-1225: 1, CSM-400-1225-T: 1
- Optical Fiber
- Magnetic Isolation Protection: 1.5 kV (built-in)
- Standards: IEEE 802.3u for 100BaseT(X) and 100BaseFX

Security Functions
- Authentication: Local database (password only)
- Encryption: HTTPS, AES-128, RSA-1024, SHA-1, SHA-256
- Security Protocols: SSHv2, HTTPS (TLS 1.2)

Power Parameters
- Input Current: 220 mA @ 12 VDC
- Input Voltage: 12 VDC
- Overload Current Protection: Supported
- Power Consumption: 220 mA @ 12 VDC

Physical Characteristics
- Dimensions: 86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in)
- Weight: CSM-400-1213/1214/1218 Series: 115 g (0.25 lb), CSM-400-1224/1225 Series: 125 g (0.28 lb)

Environmental Limits
- Operating Temperature: Standard Models: -20 to 55°C (-4 to 131°F), Wide Temp. Models: -40 to 75°C (-40 to 167°F)
- Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity: 5 to 95% (non-condensing)

Standards and Certifications
- EMC: EN 55032/35
- EMI: CISPR 32, FCC Part 15B Class A

EMS:
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
- IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
- IEC 61000-4-5 Surge: Power: 2 kV(AC), 1 kV(DC); Signal: 1 kV
- IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
- IEC 61000-4-8 PFMF
- IEC 61000-4-11

Environmental Testing:
- IEC 60068-2-1
- IEC 60068-2-14
- IEC 60068-2-2
- IEC 60068-2-3

- Safety: EN 62368-1, UL 62368-1
- Vibration: IEC 60068-2-6

MTBF
- Time: 1,454,560 hrs
- Standards: Telcordia (Bellcore), GB