91708 - 3.5″ USB 2.0 Card Reader 5 Slot + 1 x USB 2.0 Type-A socket

This card reader by Delock is used for installation in a 3.5″ slot of thePC and is connectedto an internal USB 2.0 connector. It has a five-slot card reader andenables the connection of a USB device.

Specification
- External connections: 1x CF Slot, 1x SD / MMC Slot, 1x xD Slot, 1x Micro SD Slot, 1x MS Slot, 1x USB 2.0 Type-A socket
- Internal connections: 1x 9 Pin USB 2.0 socket
- Chipset: Realtek RTS5130
- Metal housing for installation in 3.5″ slot
- Data transfer rate up to 480 Mbps
- Bootable
- LED display for the card reader for power (red) and access (green)
- Cable data:1x 9 pin USB 2.0 mullion socket cable approx. 53 cm (incl. connector) - Hot swap connection - Hot swap connection for the card reader (red). Connection)
- Hot Swap, Plug & Play

Supports the following memory cards (Slot 1)
- CF I
- CF II
- CF4.0
- CF Ultra
- CF Ultra DMA
- CF Ultra II
- CF Ultra III
- CF Ultra IV
- CF Extreme
- CF Extreme III
- CF Extreme IV
- Microdrive
- MagicStor

Supports the following memory cards (Slot 2)
- SD
- SD Pro
- SD Ultra
- SD High Capacity (SDHC)
- Turbo-SD
- SDHC Turbo
- SD Ultra
- SD Ultra II
- SDHC Ultra
- SDXC
- SDXC Ultra
- MMC-I
- MMC-II
- MMC plus
- MMC plus Turbo
- MMC 4.0
- Mini SD*
- Mini SDHC*
- Turbo Mini SD*
- MMCmobile*
- RS-MMC*
- RS-MMC 4.0*

Supports the following memory cards (Slot 3)
- xD
- xD type M
- xD type H

Supports the following memory cards (Slot 4)
- Micro SD
- Micro SDHC
- Micro SDHC Ultra
- T-Flash, MMCmicro

Supports the following memory cards (Slot 5)
- MS Micro
- MS-Pro Micro
- MS-HG Micro
- MS XC-HG Micro
- M2

*Adapter is required

System requirements
- Linux Kernel 5.11 or higher
- Windows 8.1/8.1-64/10/10-64/11
- PC with a free 3.5″ slot
- Mainboard with a free 9 pin USB 2.0 connector

Package contents
- 3.5″ Card Reader with connection cable
- Screws
- User manual