Converter USB 2.0 type-A plug to serial TTL 3.5 mm 4 pin jack 1.8 m (5 V)

This USB 2.0 to TTL converter from Delock can be connected directly to GPIO (General purpose input / output) connectors or UART (Universal Asynchronous Receiver / Transmitter) interfaces. The converter is suitable for applications on single-board computers, controllers, FPGAs, MCUs and in circuit electronics etc.

Specification

• Connectors:
• 1 x USB 2.0 type-A connector >
• 1 x TTL 5 V 3.5 mm jack plug
• Pin assignment:
• 1. TXD
• 2. RXD
• 3. GND
• 4. VCC
• Chipset: FTDI FT232RL
• Wire gauge: 28 AWG
• Compatible with UHCI / OHCI / EHCI controller
• Data transfer rate up to 3 Mbps
• Data bits: 7 or 8
• Stop bits: 1 or 2
• Parity: None, Space, Even, Odd, Marker
• Flow control: none, hardware RTS / CTS, software XON / XOFF
• FIFO:
• 128 bytes - RX
• 256 byte - TX
• Cable length incl. connections: approx. 1.8 m
• Operating temperature: -20 °C ~ 80 °C

System requirements

• Linux Kernel 2.6 or higher
• Mac OS 10.5 or higher
• Windows CE 4.2/5.0/6.0
• Windows XP/XP-64/Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64/11
• PC or notebook with a free USB type-A port

Package contents

• Converter USB 2.0 Serial TTL
• Driver CD
• Instruction manual

Packaging

• Retail Box