EDS-505A-MM-ST - Managed Ethernet switch with 3 10100BaseT(X) ports, 2 100BaseFX multi-mode ports

Introduction
The EDS-505A standalone 5-port managed Ethernet switches, with their advanced Turbo Ring and Turbo Chain technologies (recovery time < 20 ms), RSTP/STP, and MSTP, increase the reliability and availability of your industrial Ethernet network. Models with a wide operating temperature range of -40 to 75°C are also available, and the switches support advanced management and security features, making the EDS-505A switches suitable for any harsh industrial environment.
 
Additional Features and Benefits
- Command line interface (CLI) for quickly configuring major managed functions
- DHCP Option 82 for IP address assignment with different policies
- Supports EtherNet/IP and Modbus TCP protocols for device management and monitoring
- Compatible with PROFINET protocol for transparent data transmission
- Lock port function for blocking unauthorized access based on MAC address
- IGMP snooping and GMRP for filtering multicast traffic
- Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning
- QoS (IEEE 802.1p/1Q and TOS/DiffServ) to increase determinism
- Port Trunking for optimum bandwidth utilization
- RMON for proactive and efficient network monitoring
- SNMPv1/v2c/v3 for different levels of network management
- Bandwidth management to prevent unpredictable network status
- Automatic warning by exception through email and relay output

Input/Output Interface
- Alarm Contact Channels: 2, Relay output with current carrying capacity of 1 A @ 24 VDC
- Digital Input Channels: 2
- Digital Inputs: +13 to +30 V for state 1, -30 to +3 V for state 0, Max. input current: 8 mA
- Buttons: Reset button

Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector):
- EDS-505A/505A-T: 5
- EDS-505A-MM-SC/MM-ST/SS-SC Series: 3

All models support:
- Auto negotiation speed
- Full/Half duplex mode
- Auto MDI/MDI-X connection

- 100BaseFX Ports (multi-mode SC connector): EDS-505A-MM-SC Series: 2
- 100BaseFX Ports (multi-mode ST connector): EDS-505A-MM-ST Series: 2
- 100BaseFX Ports (single-mode SC connector): EDS-505A-SS-SC Series: 2

Standards:
- IEEE 802.3 for 10BaseT
- IEEE 802.3u for 100BaseT(X) and 100BaseFX
- IEEE 802.1X for authentication
- IEEE 802.1D-2004 for Spanning Tree Protocol
- IEEE 802.1w for Rapid Spanning Tree Protocol
- IEEE 802.1s for Multiple Spanning Tree Protocol
- IEEE 802.1Q for VLAN Tagging
- IEEE 802.1p for Class of Service
- IEEE 802.3x for flow control
- IEEE 802.3ad for Port Trunk with LACP

- Optical Fiber

Ethernet Software Features
- Filter: 802.1Q VLAN, Port-based VLAN, IGMP v1/v2, GVRP, GMRP
- Industrial Protocols: EtherNet/IP, Modbus TCP
- Management: IPv4/IPv6, SNMPv1/v2c/v3, LLDP, Port Mirror, Back Pressure Flow Control, BOOTP, DDM, DHCP Option 66/67/82, DHCP Server/Client, Flow control, RARP, RMON, SMTP, SNMP Inform, Syslog, Telnet, TFTP
- MIB: MIB-II, Bridge MIB, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, RMON MIB Groups 1, 2, 3, 9, RSTP MIB
- Redundancy Protocols: STP, MSTP, RSTP, LACP, Link Aggregation, Turbo Chain, Turbo Ring v1/v2
- Security: HTTPS/SSL, RADIUS, TACACS+, Port Lock, SSH, Broadcast storm protection
- Time Management: NTP Server/Client, SNTP

Switch Properties
- IGMP Groups: 256
- MAC Table Size: 8 K
- Max. No. of VLANs: 64
- Packet Buffer Size: 1 Mbits
- Priority Queues: 4
- VLAN ID Range: VID 1 to 4094

LED Interface
- LED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 100M (fiber port), MSTR/HEAD, CPLR/TAIL

Serial Interface 
- Console Port: RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1)

DIP Switch Configuration
- Ethernet Interface: Turbo Ring, Master, Coupler, Reserve

Power Parameters
- Connection: 2 removable 6-contact terminal block(s)
- Input Voltage: 12/24/48 VDC, Redundant dual inputs
- Operating Voltage: 9.6 to 60 VDC
- Input Current: EDS-505A/EDS-505A-T: 0.21 A @ 24 VDC, EDS-505A-MM-SC/MM-ST/SS-SC Series: 0.29 A @ 24 VDC
- Overload Current Protection: Supported
- Reverse Polarity Protection: Supported

Physical Characteristics
- Housing: Metal
- IP Rating: IP30
- Dimensions: 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in)
- Weight: 1040 g (2.3 lb)
- Installation: DIN-rail mounting, Wall mounting (with optional kit)

Environmental Limits
- Operating Temperature: Standard Models: -10 to 60°C (14 to 140°F), Wide Temp. Models: -40 to 75°C (-40 to 167°F)
- Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity: 5 to 95% (non-condensing)

Standards and Certifications
- Safety: EN 62368-1, UL 60950-1, UL 508
- EMC: EN 55032/35
- EMI: CISPR 32, FCC Part 15B Class A

EMS:
- IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
- IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
- IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
- IEC 61000-4-6 CS: 10 V
- IEC 61000-4-8 PFMF

- Hazardous Locations: ATEX, Class I Division 2
- Vibration: IEC 60068-2-6
- Shock: IEC 60068-2-27
- Freefall: IEC 60068-2-31
- Maritime: DNV

MTBF
- Time: EDS-505A models: 1,157,396 hrs, EDS-505A-MM/SS models: 1,090,077 hrs
- Standards: Telcordia (Bellcore), GB