EDS-405A-SS-SC - Entry-level managed Ethernet switch with 3 10100BaseT(X) ports

Introduction
The EDS-405A Series is designed especially for industrial applications. The switches support a variety of useful management functions, such as Turbo Ring, Turbo Chain, ring coupling, IGMP snooping, IEEE 802.1Q VLAN, port-based VLAN, QoS, RMON, bandwidth management, port mirroring, and warning by email or relay. The ready-to-use Turbo Ring can be set up easily using the web-based management interface, or with the DIP switches located on the top panel of the EDS-405A switches.
 
Additional Features and Benefits
- DHCP Option 82 for IP address assignment with different policies
- Supports EtherNet/IP, Modbus TCP and PROFINET  protocols for device management and monitoring
- EtherNet/IP EDS (Electronic Data Sheet) file, custom AOI (Add-On Instructions) and FactoryTalk® View faceplate available
- PROFINET GSDML file and SIMATIC STEP 7 device icons available 
- Port mirroring for online debugging
- Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning
- QoS (IEEE 802.1p and TOS/DiffServ) to increase determinism
- RMON for proactive and efficient network monitoring
- SNMPv1/v2c/v3 for different levels of network management security
- Bandwidth management to prevent unpredictable network status

Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector):
- EDS-405A, 405A-EIP/PN/PTP models: 5
- EDS-405A-MM-SC/MM-ST/SS-SC models: 3

All models support:
- Auto negotiation speed
- Full/Half duplex mode
- Auto MDI/MDI-X connection

- 100BaseFX Ports (multi-mode SC connector): EDS-405A-MM-SC models: 2
- 100BaseFX Ports (multi-mode ST connector): EDS-405A-MM-ST models: 2
- 100BaseFX Ports (single-mode SC connector): EDS-405A-SS-SC models: 2
- Optical Fiber

Standards:
- IEEE 802.3 for 10BaseT
- IEEE 802.3u for 100BaseT(X) and 100BaseFX
- IEEE 802.3x for flow control
- IEEE 802.1D-2004 for Spanning Tree Protocol
- IEEE 802.1p for Class of Service
- IEEE 802.1Q for VLAN Tagging
- IEEE 802.1w for Rapid Spanning Tree Protocol

Ethernet Software Features
- Filter: 802.1Q VLAN, GMRP, GVRP, IGMP v1/v2, Port-based VLAN
- Industrial Protocols: EtherNet/IP  , Modbus TCP, EDS-405A-PN models: PROFINET IO Device (Slave)
- Management: Back Pressure Flow Control, BOOTP, DHCP Option 66/67/82, DHCP Server/Client, Flow control, IPv4/IPv6, LLDP, Port Mirror, RARP, RMON, SMTP, SNMP Inform, SNMPv1/v2c/v3, Syslog, Telnet, TFTP
- MIB: Bridge MIB, Ethernet-like MIB, MIB-II, P-BRIDGE MIB, RMON MIB Groups 1, 2, 3, 9, RSTP MIB
- Redundancy Protocols: RSTP, STP, Turbo Chain, Turbo Ring v1/v2
- Time Management: All models: NTP Server/Client, SNTP, EDS-405A-PTP models: IEEE 1588v2 PTP (hardware-based)

Switch Properties
- IGMP Groups: 256
- MAC Table Size: EDS-405A, EDS-405A-EIP/MM-SC/MM-ST/PN/SS-SC models: 2 K, EDS-405A-PTP models: 8 K
- Max. No. of VLANs: 64
- Packet Buffer Size: 1 Mbits
- Priority Queues: 4
- VLAN ID Range: VID 1 to 4094

Serial Interface
- Console Port: RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1)

DIP Switch Configuration
- Ethernet Interface: Turbo Ring, Master, Coupler, Reserve

Input/Output Interface
- Alarm Contact Channels: Relay output with current carrying capacity of 1 A @ 24 VDC

Power Parameters
- Input Voltage: 12/24/48 VDC, Redundant dual inputs
- Operating Voltage: 9.6 to 60 VDC

Input Current:
EDS-405A, 405A-EIP/PN/MM-SC/MM-ST/SS-SC models:
- 0.594 A @ 12 VDC
- 0.286 A @ 24 VDC
- 0.154 A @ 48 VDC

EDS-405A-PTP models:
- 0.23 A @ 24 VDC

- Overload Current Protection: Supported
- Reverse Polarity Protection: Supported
- Connection: 1 removable 6-contact terminal block(s)

Physical Characteristics
- Housing: Metal
- IP Rating: IP30
- Dimensions: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
- Weight: EDS-405A-EIP/MM-SC/MM-ST/PN/SS-SC models: 650 g (1.44 lb), EDS-405A-PTP models: 820 g (1.81 lb)
- Installation: DIN-rail mounting, Wall mounting (with optional kit)

Environmental Limits
- Operating Temperature: Standard Models: -10 to 60°C (14 to 140°F), Wide Temp. Models: -40 to 75°C (-40 to 167°F)
- Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity: 5 to 95% (non-condensing)

Standards and Certifications
- Safety: All models: UL 508, Non-PTP models: UL 60950-1, EN 62368-1
- EMC: EN 55032/35
- EMI: CISPR 32, FCC Part 15B Class A

EMS:
Non-PTP models:
- IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
- IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
- IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
- IEC 61000-4-6 CS: 10 V
- IEC 61000-4-8

PTP models:
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
- IEC 61000-4-4 EFT: Power: 0.5 kV; Signal: 0.5 kV
- IEC 61000-4-5 Surge: Power: 0.5 kV; Signal: 1 kV
- IEC 61000-4-6 CS: 3 V
- IEC 61000-4-8

- Hazardous Locations: Non-PTP models: ATEX, Class I Division 2
- Railway: Non-PTP models: EN 50121-4
- Traffic Control: Non-PTP models: NEMA TS2
- Vibration: IEC 60068-2-6
- Shock: IEC 60068-2-27
- Freefall: IEC 60068-2-31
- Maritime: Non-PTP models: DNV, LR

MTBF
Time:
- EDS-405A, EDS-405A-EIP/PN models: 1,547,941 hrs
- EDS-405A-MM-SC/MM-ST/SS-SC models: 1,429,327 hrs
- EDS-405A-PTP models: 1,316,464 hrs

- Standards: Telcordia (Bellcore), GB