UA-G2-SK-Pro, Smart Door System

Hit the ground running on Access with a pro experience for a door, featuring two readers.

• (1) UniFi Access Door Hub
• (1) Access Reader G2 Professional
• (1) Access Reader G2 for door exit or entrance for additional door
• (2) UniFi Access pocket key fob

UA-Hub-Door Mechanical

• Dimensions 174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3")
• Weight 363 g (12.8 oz)
• Enclosure material
• Polycarbonate
• Mounting material
• Polycarbonate

Hardware

• Networking interface
• (5) 10/100/1000 Base-T 
• Power method
• PoE++
• UL 294 Power-limited Class 2 PSU
• UL 60950/62368 LPS/PS2 PSU
• Max. power consumption
• Without PoE output: 30W
• With PoE output: 50W
• PoE input
• 50V DC, 1A
• PoE output
• PoE passthrough, (4) PoE, 50V DC, total 20W
• Button
• (1) Factory-reset
• LEDs
• System: white/blue
• Output relays: white
• Digital input
• Request to exit/request to enter/remote release/door position sensor
• Dry output relay
• Lock: 30V DC, 1A
• Aux: 30V DC, 1A
• Powered output relay
• Lock: 12V DC, 1A
• Aux: 12V DC, 0.33A
• 12V DC, 0.33A
• Operating environment
• Indoor use only
• Operating temperature
• 0 to 40° C (32 to 104° F) 
• Operating humidity
• 5 to 95% noncondensing
• UL 294 level
• Destructive attack: Level I
• Line security:  Level I
• Endurance: Level I
• Standby power: Level I
• UL 294 statement
• Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294.
• The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
• CAN/ULC-60839-11-1 Grade
• Grade assignment: 1
• Certifications
• CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
• Document number, and issue date and/or revision level
• UA-Hub-Door002, V01

LEDs

• PoE in Steady blue: Adopted/device is ready
• Steady white: Pending adoption
• Blinking white/blue: Upgrading firmware
• PoE out Off: Not connected or no data link
• Steady blue: Connected and data link on

UA-G2-Pro Mechanical

• Dimensions 160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6")
• Weight 136 g (4.8 oz)
• Enclosure material Polycarbonate, glass
• Mount material Aluminum alloy
• Mounting Wall, gang box
• Weatherproofing IP55

Hardware

• Networking interface (1) 10/100/1,000 MbE RJ45 port
• Connectivity BLE 4.2
• NFC
• Power method PoE
• Supported voltage range 48V DC
• Max. power consumption 6W
• ESD/EMP protection Air: ±15kV, contact: ±8kV
• Sensor ToF sensor
• Camera 4000 x 3000, 12 MP, 30 FPS
• Microphone Yes
• Speaker (1) 4 ohm, 1.5W
• LEDs R/G/B/W
• Flash
• Button (1) Factory-reset
• NFC frequency 13.56 MHz
• NFC read range < 30 mm
• NFC standards ISO 14443A, 14443B, 15693
• NFC technology NFC Tag 1,2,3,4,5
• MIFARE Classic
• MIFAREPlus
• MIFARE Ultralight
• MIFARE DESFire
• Operating temperature -10 to 40° C (14 to 104° F)
• Operating humidity 5 to 90% noncondensing
• Certifications CE, FCC, IC

UA-G2 Mechanical

• Dimensions 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")
• Weight 82 g (2.9 oz)
• Enclosure material Polycarbonate, glass
• Mounting In wall, gang box
• Weatherproofing IP55

Hardware

• Networking interface (1) 10/100 MbE RJ45 port
• Connectivity BLE 4.1
• Power method PoE
• Supported voltage range 48V DC
• Max. power consumption 5W
• ESD/EMP protection Air: ±15kV, contact: ±8kV
• Sensors Proximity sensor
• Speaker (1) 8 ohm, 0.7W
• LEDs R/G/B/W
• Button (1) Factory-reset
• NFC frequency 13.56 MHz
• NFC read range < 30 mm
• NFC standards ISO 14443A, 14443B, 15693
• NFC technology NFC Tag 1,2,3,4,5
• MIFARE Classic
• MIFAREPlus
• MIFARE Ultralight
• MIFARE DESFire
• Operating temperature -30 to 45° C (-22 to 113° F)
• Operating humidity 5 to 90% noncondensing
• Certifications CE, FCC, IC

UA-Pocket Mechanical

• Dimensions 84 x 39 x 7.4 mm (3.3 x 1.5 x 0.29")
• Weight 16 g (0.56 oz)
• Enclosure material Polycarbonate, stainless steel
• Weatherproofing IP54

Hardware

• NFC frequency 13.56 MHz
• NFC technology ISO/IEC 14443 Type A
• MIFARE DESFire EV3 4K
• UniFi Access Proprietary Security Protocol
• Operating temperature -10 to 45° C (14 to 113° F)
• Operating humidity 10 to 90% noncondensing
• Certification CE