TL-SF1009P 9-Port 10/100Mbps (8x PoE+) Switch

• 9× 10/100 Mbit/s RJ45 ports
• 8× PoE+ ports for simultaneous data and power transmission
• Works with IEEE 802.3af/at compliant PoE devices
• Supports 30W PoE power per PoE port
• Supports a total PoE power of 65W for all 8 PoE ports
• Up to 250m data and power transmission range with extension mode
• Priority mode provides prioritised transmission for ports 1-2 to ensure the quality of critical applications
• Isolation mode provides data separation of individual ports to enable higher security and performancePlug
  & Play, with no further configuration required
  

HARDWARE FUNCTIONS

• Interface:
• 9× 10/100 Mbps RJ45 ports (8× 10/100 Mbps 802.3af/at PoE+ ports)
• AUTO Negotiation
• AUTO MDI/MDIX
• Cable:
• 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
• EIA/TIA-568 100Ω STP (maximum 100m)
• 100BASE-TX: UTP category 5, 5e cable (maximum 100m)
• EIA/TIA-568 100Ω STP (maximum 100m)
• Number of fans: Fanless
• Physical theft protection: Yes
• External power supply: External power supply (Output: 53.5VDC / 2.43A)
• Packet forwarding rate : 1.3392 Mpps
• PoE ports:
• Standard: 802.3 af/at compliant
• PoE ports: Ports 1-8
• Maximum PoE power: 65 W
• MAC address table: 2K
• Jumbo frames: 2 KB
• Switching capacity: 1.8 Gbit/s
• Dimensions (W*D*H): 171 × 98 × 27 mm
• Maximum power consumption:
• 3.6 (220/50 Hz. without connected PoE devices)
• 77.08 (220/50 Hz. with 65W PoE supply)
• Maximum heat output:
• 12.28 BTU/h (without PoE devices connected)
• 262.84 BTU/h (with 65W PoE supply)

SOFTWARE FEATURES

• Transmission method: store-and-forward
• Advanced features:
• Co-compatible with IEEE 802.3af/at compliant PoE devices
• Extension mode switch (ports 1-4 and ports 1-8, up to 250m PoE for power and data)
• Priority mode switch (ports 1-2)
• Isolation mode switch(ports 1-8)
• Mac address auto-learning and auto-aging
• IEEE802.3x flow control for full-duplex mode and backpressure for half-duplex mode

OTHER

• Certification: FCC, CE, RoHS
• Package contents:
• TL-SF1009P
• Power supply unit
• Installation guide
• Environment:
• Operating temperature: 0-40 ℃ (32-104 ℉)
• Storage temperature: -40-70 ℃ (-40-158 ℉)
• Operating humidity: 10-90% RH non-condensing
• Storage humidity: 5-90% RH non-condensing