11476 - DisplayPort 1.4 KVM Switch 8K 60 Hz with USB 5 Gbps and Audio

This KVM switch by Delock is a practical solution to operate two computers with DisplayPort output on one DisplayPort monitor.
Peripherals
Furthermore, mouse and keyboard can be connected via two USB 2.0 ports, and hard disks or USB storage devices can be connected via two USB 5 Gbps ports.
Multi-Stream Transport (MST)
Support for MST (Multi-Stream Transport) allows multiple monitors to be used at the DisplayPort output with an optional MST hub.
Note
MST (Multi-Stream Transport) requires either monitors capable of DisplayPort daisy-chaining or an active DisplayPort MST hub. The PC source must be compatible with DisplayPort MST.

Specification
- Connections Input: 2x DisplayPort socket, 2x USB 5 Gbps type-B socket, 2x 3.5 mm 3 pin jack socket (audio), 1x DC 5V power connection
- Output: 1x DisplayPort socket, 2x USB 5 Gbps type-A socket (USB hub), 2x USB 2.0 type-A socket (keyboard + mouse), 1x 3.5 mm 3-pin jack socket (audio), 1x 3.5 mm 4-pin jack socket (switch)
- Switch button with two-colour LED display for source
- Switching via button or hotkey
- Automatic switching when switching a PC on or off
- Independent switching of source, audio and USB hub
- 2x USB 5 Gbps type-A socket - Battery charging specification BC1.2
- Data transfer rate up to 5 Gbps
- DisplayPort 1.4 specification
- Supports Display Stream Compression 1.2 (DSC)
- Supports HDR
- Supports HDCP 1.4 and 2.2
- Resolution up to monitor with DSC support: 7680 x 4320 @ 60Hz, 3840 x 2160 @ 144Hz, monitor without DSC support:
7680 x 4320 @ 30Hz, 3840 x 2160 @ 120Hz
(depending on system and connected hardware)
- DisplayPort output supports Dual Mode DP++
- Supports MST (Multi-Stream Transport)
- Robust metal housing
- Colour: black
- Dimensions (LxWxH): approx. 170 x 74 x 30mm
Power supply specification
- Plug-in power supply Input: AC 100 ~ 240V / 50 ~ 60Hz / 0.8A
- Output: 5.0 V / 4.0 A / 20.0W
- Ground outside, plus inside
- Dimensions inside: ø approx. 2.1mm
- Outside: ø approx. 5.5mm
System requirements
- PC with DisplayPort socket + USB Type-A socket
- Monitor or TV with DisplayPort connection
Package contents
- KVM switch with USB and audio
- 2x cable USB 5 Gbps A to USB 5 Gbps B , length approx. 1.5m
- 2x cable DisplayPort plug to DisplayPort plug, length approx. 1.5m
- 2x cable 3.5 mm jack to 3.5 mm jack, length approx. 1.5
- 1x switch with cable, length approx. 1.8m
- External power supply
- Operating instructions