62661 - USB 3.0 dual docking station for 2 x SATA HDD / SSD with clone function, black

This HDD / SSD docking station from Delock is used for the external connection of two 2.5″ or 3.5″ SATA HDDs / SSDs via the USB interface. This solution means that no external housing is required, as the HDD / SSD is inserted directly into the docking station. In addition, the clone function allows the contents of the hard disk to be copied from one hard disk to another without using a PC.

Specification

• Connectors: 2 x SATA 6 Gb/s 22 pin socket, 1 x USB 3.0 type-B socket, 1 x DC power socket
• Function buttons: 1 x clone button, 1 x on/off switch
• For 2.5″ and 3.5″ SATA HDDs / SSDs
• Suitable for all SATA HDDs / SSDs up to SATA 6 Gb/s
• Data transfer rates up to: SuperSpeed 5 Gb/s, Hi-Speed 480 Mb/s, Full-Speed 12 Mb/s, Low-Speed 1.5 Mb/s
• LED display for power, access and copy status
• Dimensions (LxWxH): approx. 149 x 114 x 61 mm
• Plug & Play

Power supply specification

• Plug-in power supply unit
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.5 A
• Output: 12 V / 3 A,
• Ground outside, plus inside
• Dimensions: inside: ø approx. 2.5 mm, outside: ø approx. 5.5 mm, length: approx. 9.5 mm

System requirements

• Linux Kernel 3.7 or higher
• Mac OS 10.7 or higher
• Windows Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64
• PC or notebook with a free USB type-A port

Package contents

• Dual Docking Station
• USB 3.0 cable
• External power supply 12 V / 3 A
• Instruction manual