47224 - 3.5" removable frame for 1 x 2.5" SATA HDD / SSD

You can use this Delock removable frame both externally and internally to connect a 2.5″ SATA hard drive. Slide the hard drive directly into the frame and connect it to a Power Over eSATA port using an optional cable, or internally to SATA. The size of the frame corresponds to that of a 3.5″ hard drive. You can therefore install it in any 3.5″ slot or in a 5.25″ removable frame.

Specification
- External connectors: 1 x SATA 22 pin male
- Internal connectors: 1 x SATA 22 pin female (NSS connector)
- Suitable for 2.5″ SATA HDD / SSD
- HDD height up to 12.5 mm
- SATA HDD / SSD up to 6 Gb/s
- Supports 5 V HDD / SSD
- Data transfer rate up to 6 Gb/s
- Possible applications: internally in a 3.5″ bay, in a 5.25″ removable frame, externally via eSATAp (cable optional)
- Hot Swap
- With special SATA NSS connector internally to protect the SATA connector of the hard drive from wear and tear each time it is changed
- Optional HDD fan (mounting holes on the underside of the removable frame)
- OS independent, no driver installation required

System requirements
- For external use PC or notebook with a free Power Over eSATA port (optional eSATAp cable Art. 84396 / 84432)
- For internal use: 1 SATA data cable, PC with a free SATA port, power supply unit with a free SATA power connection

Package contents
- Removable frame
- 1 x 2.5″ hard drive protective film
- Screws
- Operating instructions