Converter USB Type-C™ 2.0 male to TTL 5 V female post 6 pin 2.0 m

This USB Type-C™ 2.0 to TTL converter from Delock can be connected directly to GPIO (General purpose input/output) connectors or UART (Universal Asynchronous Receiver/Transmitter) interfaces. The converter is suitable for applications on single-board computers, controllers, FPGAs, MCUs and in circuit electronics, etc.

Specification

• Connectors:
• 1 x USB Type-C™ 2.0 male >
• 1 x TTL 5 V 6 pin male connector
• Pin spacing: 2.54 mm
• Chipset: FTDI FT232RL
• Compatible with UHCI / OHCI / EHCI controller
• Data transfer rate up to 3 Mbps
• Data bits: 7 or 8
• Stop bits: 1 or 2
• Parity: None, Space, Even, Odd, Marker
• Flow control: none, hardware RTS / CTS, software XON / XOFF
• Signals: RXD (YE), TXD (OG), CTS (BN), RTS (GN) and GND (BK), VCC (RD)
• Output voltage: 5 V
• FIFO:
• 128 byte - RX
• 256 byte - TX
• Cable type: UL AWM 2464 VW-1 Flame Test
• Wire cross-section: 26 AWG
• Cable length incl. connectors: approx. 2.0 m
• Operating temperature: -20 °C ~ 80 °C

System requirements

• Windows 7/7-64/8.1/8.1-64/10/10-64/11/Windows Server 2012 R2/Windows Server 2016, Linux Kernel 2.6 or higher, Mac OS 10.9 or higher
• PC or notebook with a free USB Type-C™ port

Package contents

• USB Type-C™ 2.0 TTL cable
• Instruction manual

Packaging

• Resealable bag