Adapter cable USB 2.0 type-A to serial RS-232 with 9 open cable ends 1 m

This USB 2.0 Type-A to serial RS-232 adapter cable from Delock is suitable as a connection cable between a device with USB 2.0 and a device with RS-232 connection. With the tin-plated open cable ends, the connection can be made directly to an RS-232 device port or flexibly with various terminal blocks. In addition, it can be used to create customised adapters and cable assemblies.

• Connections: 1x USB type-A plug, 1x serial RS-232 9x open cable ends + shielding (tinned)
• Chipset: FTDI FT232R
• Compatible with UHCI / OHCI / EHCI controller
• Data bits: 7 or 8
• Stop bits: 1 or 2
• Parity: None, Space, Even, Odd, Marker
• Flow control: None, Hardware RTS / CTS, Software XON / XOFF
• Data transfer rate up to 230.4 Kbps
• Pin assignment: TxD (red), RxD (brown), RTS (blue), CTS (violet), DTR (orange), DSR (green), DCD (black), RI (white), GND (yellow), shielding (matt black)
• ESD overvoltage protection IEC 61000-4-2
• HCP & VCP: ±4 kV
• Air discharge: ±8 kV
• Contact discharge: ±4 kV
• Cable diameter: approx. 5 mm
• Wire cross-section: 26 AWG
• Conductor: stranded copper wire
• Insulation: PVC
• Cable length incl. connectors: approx. 1 m
• Colour: black
• Operating temperature: -10°C ~ 80°C