F3X26-TB-FL - 2G/3G/4G GPRS/LTE & WCDMA Wi-Fi Router

Four-Faith F3X26-TB-FL - 2G/3G/4G GPRS/LTE & WCDMA Wi-Fi Router

The F3X26-TB industrial router is an IoT wireless communication router. It is using the public cellular network GPRS/CDMA/WCDMA/EVDO/LTE to provide a long distance, wireless and large data transmission function for users.

The product uses a high-performance industrial-grade CPU and wireless module with an embedded real-time operating system as the software support platform. It provides 3x RS232 and 1x RS485, 1x Ethernet LAN, 1x Ethernet WAN and Wi-Fi (or GPS). It can be connected to the serial device, Ethernet devices and Wi-Fi devices at the same time, achieving data pass-through function.

F3X26-TB has been widely used in the M2M industry of the IoT industrial chain, such as smart grid, intelligent transportation, smart home, finance, mobile POS terminals, supply chain automation, industrial automation, intelligent building, fire protection, public safety, environmental protection, meteorology, digital medical, telemetry, agriculture, forestry, water, coal, petrochemical and other related fields.

Cellular Specification

• Standard & band: Supports Full-NetCom: LTE FDD, LTE TDD, EVDO, WCDMA, TD-SCDMA, CDMA1X, GPRS/EDGE
• Bandwidth: FDD-LTE: Downstream rate 150 Mbps, uplink rate 50 Mbps; TD-LTE: Downstream rate 130 Mbps, uplink rate 35 Mbps; TD-HSPA+: Downstream rate 4.2 Mbps, uplink rate 2.2 Mbps; DC-HSPA+: Downstream rate 42 Mpbs, uplink rate 5.76 Mbps; HSPA+: Downstream rate 21 Mpbs, uplink rate 5.76 Mbps: UMTS: 384 Kbps
• Transmit power: <23 dBm
• Sensitivity: <-97 dBm

Wi-Fi Specification

• Standard & band: IEEE 802.11b/g/n
• Bandwidth: IEEE 802.11b/g: 54 Mbps (maximum), IEEE 802.11n: 144 Mbps (maximum)
• Security: Supports WEP, WPA, WPA2 encryption methods, optional WPS function Transmit power: 15 +/-2 dBm

Hardware

• CPU: Industrial-grade CPU
• Flash: 16 MB (optional for 64 MB)
• DDR2: 128 MB (optional for 256 MB)

Interface

• WAN interface: 1x 10/100M RJ45 Ethernet port, adaptive MDI/MDIX, built-in 15 kV ESD (can be used as a LAN)
• LAN interface: 1x 10/100M RJ45 Ethernet port, adaptive MDI/MDIX, built-in 15 kV ESD
• Serial port: 3x RS232, 1x 485 serial interface with built-in 15 kV ESD; Data bits: 5, 6, 7, 8 bits; Stop bits: 1, 1.5 (optional), 2 bits; Error detection: None, even parity, odd parity, SPACE (optional) and MARK (optional)
• LED indicators: Power, System, LAN, WAN, NET, signal indicator
• Antenna interface: Cellular: Standard SMA female antenna interface, characteristic impedance: 50 ohms; Wi-Fi: Standard SMA male antenna interface, characteristic impedance: 50 ohms
• SIM/UIM slot: Standard SIM card slot, supports 1.8/3 V SIM/UIM card, built-in 15 kV ESD, supports dual-SIM card option
• Power interface: Standard 3.5 mm terminal block interface, with built-in phase-reversal and over-voltage protection
• Reset button: Restore the router to its original factory default settings

Power

• Input voltage: DC 12 V/1.5 A
• Accepted range: DC 5~36 V

Power Consumption

• Standby: 95~135 mA (at) 12 V DC
• Communicating: 165~220 mA (at) 12 V DC

Physical Properties

• Casing: Metal casing, IP30 protection level
• Dimensions: 126 x 89 x 30 mm (excluding antennas and mountings)
• Weight: 320 g

Others

• Operating temperature: -35°C - +75°C
• Storage temperature: -40°C - +85°C
• Relative humidity: 95% (non-condensing)