FIBEFGR-223 - Roller Shutter 3

Fibaro Roller Shutter 3

Fibaro Roller Shutter 3 is a device designed to control roller blinds, awnings, venetian blinds, gates and other single phase, AC powered devices.

Roller Shutter 3 allows precise positioning of roller blinds or venetian blind lamellas. The device is equipped with power and energy monitoring. It allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.

Main features of Fibaro Roller Shutter 3:

• Compatible with any Z-Wave or Z-Wave Plus controller
• Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption
• To be installed with roller blind motors with electronic or mechanical limit switches
• Advanced microprocessor control
• Active power and energy metering functionality
• Works with various types of switches – momentary, toggle and dedicated roller blind switches
• To be installed in wall switch boxes

• Power supply: 100-240 V ~50/60 Hz
• Rated load current: 4.2 A for lamps and resistive loads, 1.7 A for motors with compensated power factor (inductive loads)
• Supported motor type: Single-phase AC motors
• Required limit switches: Electronic or mechanic
• Power consumption: Up to 0.8 W
• Operating temperature: 0°C to 35°C
• Operating humidity: 10% to 95% RH without condensation
• Active element: Micro-gap relay switch
• For installation in boxes: Diameter ≥ 50 mm, depth ≥ 60 mm
• Radio protocol: Z-Wave (500 series chip)
• Radio signal power: EIRP up to 6 dBm
• Radio frequency: 868.4 or 869.8 MHz EU; 908.4 or 916.0 MHz US; 921.4 or 919.8 MHz ANZ; 869.0 MHz RU;
• Range: Up to 50 m outdoors; up to 40 m indoors (depending on terrain and building structure)
• Dimensions (L x W x H): 42.5 x 38.25 x 20.3 mm
• Compliance with EU directives: RoHS 2011/65/EU; RED 2014/53/EU