20 or more:
210,17 EUR
50 or more:
208,36 EUR
200 or more:
206,55 EUR
500 or more:
204,73 EUR
1000 or more:
202,92 EUR
2500 or more:
201,11 EUR
SPAHA100 - Mast System with Rafter Bracket
Deliverytime: 5 - 7 working days (Mo-Fr) *
Key points at a glance:
Product Description
Televes Mast System with Rafter Bracket, SPAHA100
AAs the rafter brackets will be mounted from outside on the rafters, no roof penetration is necessary and the insulation will not be damaged. This way, no antenna mast will interfere with a loft conversion. The installation is much easier than with conventional systems, and thus very cost-effective. Antenna cables can be routed through the tube of the SPAHA100/... series. The problem with condensation water is superfluous, as the warm indoor air cannot condense on the cold pipe. The rafter brackets are also ideal for low-energy houses, as there is no longer a cold bridge.
- Distance between rafters: 500 - 900
- Tube length + /mm: 900 / 57
- Roof pitch: 15° - 50°
- Dynamic pressure / N : 800**
- Max. reflector size /mm: 1000
- Max. reflector size /mm: 900
- Grounding screw: Yes
- Mast cap: Yes
- Screws 10 x 100: 6
- Basic frame L x W x H mm: 210 x 995 x 30
- Weight: 9.2 kg
- Incl. screws: Yes
**= Corresponds to a wind speed of 35 m/sec (wind force 12)
