USB Barcode Scanner 1D and 2D with Connection Cable - German Version

This barcode scanner from Delock can be connected directly to a PC or notebook. Alternatively, an adapter can be used to connect the scanner to a mobile phone or tablet. All common 1D and 2D barcode types can be captured precisely, even at long distances. In addition, the scanner recognises barcodes displayed on screens and monitors.

The scanner automatically adapts to the ambient brightness and captures up to 30 scans per second under optimal lighting conditions. In low ambient light conditions, the barcode is illuminated by an additional white LED and can thus also be used in poor lighting conditions.

The data transfer of the scanned barcodes is done via the included USB cable.

The USB cable is connected to the scanner via an RJ50 plug. The connection is flush, so that the cable can only be removed using the ejection tool provided. This means that there is always a firm connection between the scanner and the system.

Note: This scanner is intended exclusively for the output of the German keyboard.

• Connection: 1x RJ50 socket
• Decoding chip: ARM Cortex 32 bit
• Resolution: max. 640 x 480
• Trigger: push button
• Reading distance: approx. 30 mm to 350 mm
• Reading accuracy: 4 mil
• Light colour: Visible LED red
• Compensating light: LED white
• Sensor: CMOS image sensor
• Scan rate: up to 30 scans per second
• Scan angle: 44
• Ambient brightness: max. 100000 Lux
• Input voltage: 5 V
• Power consumption: operation: max. 262 mA; standby: max. 75 mA
• Operating temperature: -20°C ~ 60°C
• Storage temperature: -30°C ~ 70°C
• Relative humidity: 5 - 95 % (non-condensing)
• Colour: Black
• Weight: approx. 150 g
• Dimensions (LxWxH): approx. 160 x 90 x 65 mm
• Cable length incl. connector: approx. 1.5 m
• Scanning codes: Code 128, Code 39, Interleaved 2 of 5, EAN-8 / EAN-13, ISBN - 13, Data Matrix, Micro QR, PDF417, QR Code