87775 - Wireless Display USB Type-C Adapter Full HD - HDMI + VGA

Wireless Display USB Type-C Adapter Full HD - HDMI + VGA with Card Reader and Hub

This adapter by Delock can be used to wirelessly transmit an audio and video signal in 1080p format over a range of up to 10 m. Only the transmitter has to be connected to the USB Type-C port of the device and the receiver via HDMI or VGA cable to a TV, projector or similar. Both video outputs can be used at the same time to display the signal on two displays at the same time.

Two built-in USB Type-A ports allow the use of peripherals, an SD and a Micro SD slot allow the use of memory cards.

For transport, the transmitter unit can easily be inserted into the receiver unit’s deepening, where both parts are held together by a magnet.

After connecting the two parts of the device, the connection is automatically established, no drivers need to be installed or settings made.

• Connectors: Transmitter: 1x USB Type-C male, 2x SuperSpeed USB (USB 3.2 Gen 1) Type-A female, 1x SD slot, 1x Micro SD slot; Receiver: 1x HDMI-A female, 1x VGA female, 1x 3.5 mm 3 pin stereo jack female, 1x USB Type-C female (power supply)
• Resolution: HDMI up to 1920 x 1080 @ 60 Hz, VGA up to 1920 x 1080 @ 60 Hz (depending on the system and the connected hardware)
• Transmission of audio and video signals
• Functions: Mirrored or extended, only one monitor can be extended, all others are mirrored
• Bandwidth: 5 GHz, operating range up to 10 m
• Two memory cards can be used at the same time
• Colour: Black
• Cable length: ca. 15 cm
• Dimensions transmitter (L x W x H): ca. 111 x 56 x 13 mm
• Dimensions receiver (L x W x H): ca. 115 x 61 x 22 mm

System Requirements

• Android 10.0 or above
• iPad Pro (2018)
• Linux Kernel 5.4 or above
• Mac OS 10.15.6 or above
• Surface Pro 7
• Windows 8.1/8.1-64/10/10-64
• Device with a free USB Type-C port and DisplayPort alternate mode or with a free
• Thunderbolt 3 port
• A free USB Type-A female port (power supply)