20 or more:
119,54 EUR
50 or more:
118,50 EUR
200 or more:
117,46 EUR
500 or more:
116,42 EUR
1000 or more:
115,38 EUR
2500 or more:
114,34 EUR
BPI-R3 - Router board with MediaTek MT7986 quad-core ARM A53
Deliverytime: 1 - 3 working days (Mo-Fr) *
available: < 10
Product Description
BPI-R3 - Router board with MediaTek MT7986 quad-core ARM A53
Banana Pi BPI-R3 router board with MediaTek MT7986 (Filogic 830) quad-core ARM A53 + MT7531A chip design, 2 GB DDR RAM, 8 GB eMMC Flash onboard. The BPI-R3 is a very high performance open source router development board. It supports WiFi6 2.4 GHz WiFi use MT7975N and 5 GHz WiFi use MT7975P, as well as 2x SFP 2.5 GbE ports and a 5 GbE network port.
The MT7986 (Filogic 830) integrates four ARM Cortex-A53 cores up to 2 GHz with up to 18,000 DMIPs of processing power and 6 Gbps of dual 4x4 WiFi6 connectivity. It has two 2.5G Ethernet interfaces and serial peripheral interfaces (SPI). Filogic 830‘s built-in hardware acceleration engine enables fast and reliable WiFi offloading and wireless network connection. In addition, the chip supports Mediatek FastPath™ technology, which is suitable for games, AR/VR and other low-latency applications.
WiFi6 has many advantages over its predecessors, including lower latency, larger bandwidth capacity and faster transmission rates. Wireless network devices supporting the 6 GHz band mainly use 160 MHz wide channel and 6 GHz uncongested bandwidth to provide multigigabit transmission and low-latency WiFi connection, providing reliable wireless network for streaming media, games, AR/VR and other applications.
- CPU: MediaTek MT7986 (Filogic 830) quad-core ARM Cortex A53+MT7531 chip design
- SDRAM: 2 GB DDR4
- On board storage: MicroSD (TF) card, 8 GB eMMC onboard
- GPIO: 26-pin GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S
- On board network: 5x 10/100/1000 Mbps Ethernet ports
- SFP: 2x SFP 2.5 GbE
- WiFi: WiFi6 4x4 2.4 GHz WiFi (MT7975N) + 4x4 5 GHz WiFi (MT7975P)
- mini PCIe: Mini PCIe via USB
- M.2 interface: M.2 KEY-M PCIe interface
- USB: 1x USB 3.0 host, 2x USB interface with slot
- Buttons: Reset button, WPS botton, boot switch
- LEDs: Power status LED and RJ45 LED
- DC power: 12 V/2 A with DC in
- Sizes: 100.5 x 148 mm, same as Banana Pi BPI-R64 and Banana Pi BPI-R2
- Weight: 200 g
