90511 - Crimping tool with stripper and network tester for 8P, 6P, 6P DEC or 4P connectors

Crimping pliers with stripping tool and network tester for 8P, 6P, 6P DEC or 4P connectors

This Delock tool can be used to quickly and easily connect a network cable to a connector. The rubberized handles offer a firm hold during the crimping process.

The multi-function pliers are suitable for crimping, stripping and cutting 8P (RJ45), 6P (RJ12 / 11) or 4P (RJ10) plugs and cables. Three integrated blades ensure problem-free stripping of the cable or cutting off the strands. These pliers are also suitable for crimping modular plugs with offset detents DEC.

Thanks to the integrated cable tester, correct wiring can be tested directly after the crimping process. All three connector types fit into the sockets provided.

There is a separate pin arrangement for each connector type. The white number arrangement (1 - 8 + G) is used to test the RJ45 pin assignment. The yellow row of numbers (1 - 6) stands for RJ11 and the green (1 - 4) for the RJ10 connector.

During the test, the red LEDs run through the respective assignment. For example, if the RJ10 plug is tested, the red LED starts with the green 1.

The pliers have a locking mechanism which is intended to prevent unintentional closing or opening. Five clearly audible locking points signal this mechanism. After the fifth, the pliers open again when the handles are squeezed together.

The screw attached to the handle can be used to open it at any time.

The battery compartment is built into the handles of the pliers. 3 x LR44 batteries are required, which are not included in the scope of delivery.

• Metal pliers with plastic handles and locks
• Integrated pliers and wire stripper
• Connectors suitable for crimping: e.g. B. RJ45, RJ12, RJ11, RJ10
• Color: gray / black
• Weight: approx. 358 g
• Dimensions (LxWxH): approx. 19.0 x 6.9 x 2.2 cm