FreePBX is a web-based open source GUI (graphical user interface) that controls and manages Asterisk (PBX), an open source communication server. FreePBX is licensed under the GNU General Public License (GPL), an open source license. FreePBX can be installed manually or as part of the pre-configured FreePBX Distro that includes the system OS, Asterisk, FreePBX GUI and assorted dependencies.

Some of the features that FreePBX supports out of the box are:

Unlimited number of voicemail boxes
Follow Me functionality
Ring groups with calls confirmation
Unlimited number of conferences (limited by available CPU power)
Paging and Intercom functionality for SIP phones that support it
Music on hold (via MP3s, or streamed off the internet)
Call queues
And many more

The FreePBX software is running on an energy saving APU2E4 system, so the power input averages 10 watt at maximum. The system is fanless, passively cooled and extremely small.

Update APU2E: Changed battery socket footprint to avoid contact problems. Added signal integrity resistor for core voltage control signal.

Scope of delivery:

1x 19" DualRack enclosure with single slot front panel
1x APU2E4
1x 16 GB mSATA SSD with pre-installed FreePBX software
1x power supply (12 V, 3 A)
1x power cord set incl. power cord and suitable connection cables for connecting the board to the internal power supply
1x network cable (1 m)

CPU: AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2 MB L2 cache
DRAM: 4 GB DDR3-1333 DRAM
Storage: Boot from mSATA SSD, SD card (internal sdhci controller) or external USB, 1 SATA + power connector
12 V DC, about 6 to 12 W depending on CPU load, jack = 2.5 mm, center positive
Connectivity: 3 Gigabit Ethernet channels (Intel i210AT)
I/O: DB9 serial port, 2x USB 3.0 external + 2x USB 2.0 internal, three front panel LEDs, pushbutton
Expansion: 2 miniPCI express (one with SIM socket), LPC bus, GPIO header, I2C bus, COM2 (3.3 V RXD / TXD)
Board size: 6 x 6" (152.4 x 152.4 mm) - same as apu1d, alix2d13 and wrap1e
Firmware: Coreboot
Cooling: Conductive cooling from the CPU to the enclosure using a 3 mm alu heat spreader (included)

Downloads

Brochure

File type: | File size: