RFA-12-A95-CAX-A13 - 19" wall-mounted cabinet, 3 sections, 6 + 12 + 3 HU, 50 kg load capacity

Triton RFA-12-A95-CAX-A12 - 19" Wall-mounted cabinet, 3 sections, 6 + 12 + 3 HU, 50 kg load capacity

1st section

The first section allows the installation of 19 equipment with a maximum
height of 6 HU and a depth of 450 mm. The device is positioned vertically
and 19 rails are infinitely adjustable over the full depth of the
cabinet. On the back wall is a cable entry as well as on the top and
bottom of the cabinet. Cable connections between sections allow the opening
at the central divider. All cable entries have break-out covers.

2nd section

The second section offers a mounting width of 19, height of 12 HU and depth of 450 mm.
Mounting rails are infinitely adjustable within the whole depth. This
section is usually used for structured cabling and active elements of
the network. Here are individual services connected to the work places.
The recommended capacity is up to 48 work places (2 ports per work place according to standards).

3rd section

The third section occupies the whole bottom area of the wall cabinet. There is space for a
device with a maximum depth of 800 mm, width of 19 and a height
depending on the
model of the cabinet from 2 to 7 HU. Access to this section is provided
by a
door on the right side of the cabinet. Sufficient space must be kept
next to the cabinet for device installation and maintenance.

Flexible door opening

The hinge system allows the door to be opened up to 180°.

Adjustable vertical rails

One pair of vertical 19 rails is freely adjustable within the cabinet
depth. This simplifies mounting devices and organizing
connecting cables.

Rigid construction

High-quality workmanship and up-to-date technologies ensure a perfect look of the cabinet.

Bottom section for servers

19 section in the lower part of the cabinet is designed for installation
of servers and other devices on sliding rails. It may have a capacity of 2 to 7 Units. Each section of the cabinet is closed by a lock, on
request with a unique key.

Server installation

Rack-mount servers
or similar devices with a depth of up to 800 mm are mounted into the
cabinet using special telescopic rails which are specific to each device and
are not part of the cabinet.

Cooling of installed equipment

Cooling by air flow through perforation of the frame and side door can be
supported by installing fans for wall-mounted cabinets.

Size in mm:

• 745 x 540 x 900
  

Max. server height for 3rd section:

• 3 HU

Material

• Satefy hardened glass 5 mm thick
• Steel sheet

Supply includes

• 4x keys - front door
• 6x screws 6x50
• 6x washers 6,6
• 6x dowels 10
• 8x captive nuts M6
• 1x blanking panel with brush