JVS-S06-4P-65W - 4-Port PoE Network Switch

Deliverytime: 1 - 3 working days (Mo-Fr) *
available: < 10
39,65 EUR
Key points at a glance:
Product Description

JVS-S06-4P-65W - 4-Port PoE Network Switch

The JVS-S06-4P 100-Megabit standard PoE switch provides 6x 10/100M adaptive RJ45 ports, and ports 1 to 4 have PoE power supply which can be used as Ethernet power supply equipment. All ports can automatically detect and identify devices that meet IEEE 802.3at/af standards and power them via network lines. It supports general switch mode/VLAN isolation 150m transmission and other two modes. JVS-S06-4P makes it easier for you to use PoE technology to deploy wireless access points (APs) and terminal network devices based on IP.

Product Characteristics

  • IEEE 802.3 Ethernet and IEEE 802.3u fast Ethernet protocol standard
  • Support for IEEE 802.3at/af standard, compatible with IEEE 802.3at/af for power equipment (PD)
  • Supports common switch mode/VLAN isolation 150 m transmission two modes
  • Provides 6x 10/100m adaptive RJ45 ports, in which ports 1 to 4 support PoE power supply
  • All ports support automatic flip (Auto MDI/MDI-X) functionality
  • Support IEEE 802.3X full-duplex flow control and back pressure semi-duplex flow control
  • All ports have line speed forwarding capability
  • Autonomous Learning and Aging supporting MAC address
  • Full metal housing, full load 65 W
Specifications

Software Specifications

  • Compliance with IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet protocol standards (PD)
  • Compatible with IEEE 802.3at/af standard store-and-forward
  • MAC automatic Learning and Aging
  • IEEE 802.3X full duplex flow control and back pressure semi-duplex flow control

Hardware Specifications

  • Port: 100M PoE: 4x; 100M Cascade RJ45: 2
  • Function: Storage and forwarding: Support; Exchange content: 1.2G; MAC address: 2K
  • Use environment: Working temperature: 0°C ~ 40°C; Storage temperature: -40°C ~ 70°C; Working humidity: 10 ~ 90% RH (non-condensing); Storage humidity: 5 ~ 90% RH (non-condensing)
  • PoE standard: Standard IEEE 802.3af/at single port maximum power: 30 W; Machine maximum power: 65 W; Supports over-current, over-voltage, short-circuit full protection; Supports High Power PD soft start; Supports sequential boot
  • Input power supply: AC input 220 V 50/60 Hz; Power 52 V - 150 W
  • Supported standards & protocols: IEEE 802.3 Ethernet media access control protocol; IEEE 802.3i 10BASE-T Ethernet; IEEE 802.3u 100BASE-TX Fast Ethernet; IEEE 802.3af realizes Ethernet equipment power supply by Ethernet data line pair or device; IEEE 802.3at realizes IEEE 802.3x flow control of Ethernet equipment by Ethernet data line pair or device
  • Default system mode: General switch/VLAN isolation 150 m transmission
  • Data signaling rate: Ethernet 10 Mbps half-duplex, 20 Mbps full duplex; Fast Ethernet: 100 Mbps half-duplex, 200 Mbps full duplex
  • Network medium: 10 Base-T: 2 to 3 classes (Cat. 3) or more UTP/STP (≤ 100 m); 100Base-TX: 2 to 5 classes (Cat. 5) or more UTP/STP (≤ 100 m); 10Base-TX: 2 to 5 classes (Cat. 6) or more UTP/STP (≤ 250 m)
  • Physical specification: Product size: 190 x 131 x 34 mm (L x W x H)
This website uses cookies to ensure you get the best user experience. Privacy Policy