Available online: now
Available at our branch in Chemnitz: 9 - 11 Days
available: > 25
Deliverytime: 9 - 11 Days *
73,99 EUR
There are currently no product reviews
Key points at a glance:

Product Description


The GPON Wi-Fi ONU (Optical Network Unit) is equipped with one GPON port, four 10/100 Mbps RJ-45 LAN ports and two FXS RJ-11 interfaces. It is also a high-end multi-terminal product, which supports the IEEE 802.11b/g/n standard. It provides residential and office users with the ideal solution for sharing an ultra high-speed fiber optical broadband connection. When functioning with a GPON Optical Network Terminal (ONT), it provides additionally highly-effective GPON solutions for FTTH networks. With its simple management, the GPON is easy to install and to maintain.


  • Main service: 1 GE + 3 FE + 1 VOIP + 1 WI-FI
  • Plug and play, integrate auto detection, auto configuration and auto firmware upgrading
  • Integrate OMCI and TR-069 remote configuration and maintenance
  • Support flexible QinQ VLAN, DHCP server/relay and IGMP/MLD multicast monitoring function
  • Support diagnostic monitoring and remote disabling of fiber optical
  • Compatible with Huawei, ZTE and Fiberhome OLT
  • Support 802.11n Wi-Fi T/R function
  • Support NAT and firewall function
  • POTS integrated circuit test complies GR-909
  • WAN support networking bridge, router and bridge/router mixed mode


Data service functions

  • Full speed 1G non-blocking switching
  • 2048 MAC address table
  • 16 LAN
  • Support VLAN QinQ, transparent, tag, translation, trunk, etc.
  • Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc.
  • Support auto polarity detection of Ethernet ports (AUTO MDIX)
  • Integrated IEEE802.1p QoS with four level priority queues
  • Support IPv4 IGMP snooping and IPv6 MLD snooping
  • Support bridging, router and bridging/router mixed mode

POTS service function

  • Support SIP voice protocol
  • Support H.248 voice protocol
  • SIP protocol: ISP provide the port number of the main SIP proxy server and terminal VOIP
  • Value range is 1-65535, system default value is 5060
  • H.248 protocol: ISP provide port number of the spare MGC server and VOIP terminal
  • Value range is 1~65535, system default value is 2944
  • Port ringing current voltage: 50+/-10VAC30+/-10H
  • Port type POTS (VOIP)
  • Support G.711 A-Law/u-Law, G729A/B, G.723.1-5.3/6.3, G.726. etc.; voice coding/compressed technology
  • Support auto switch in main interface and standby interface by the software

Wi-Fi service

  • Support integrated 802.11b/g/n, 300 Mbps, 2T2R
  • Support 64 connections
  • Support WEP and WPA/WPA2 security protocols
This website uses cookies to ensure you get the best user experience. Privacy Policy