BDCOM P3310 EPON OLT 4GE – High quality OLT device

BDCOM P3310 is an OLT device for passive optical networks in accordance with the IEEE 802.3ah communication standard and the PRC internal communication standard. It has 2 Combo ports, 2 Gigabyte optical ports, 2 Gigabyte RJ45 ports and a console port. In addition, it is equipped with 4 slots for SFP inserts. BDCOM P3310 supports symmetrical uplink/downlink PON transmission at 1.25 Gbps. Thanks to the effective use of the band and the offered Ethernet services, it allows operators to provide users with reliable and high-quality services.

Basic Technical Parameters

• System capacity: Feedback ratio: 1:64; Backplane bandwidth: 32 G
• EPON: Bit rate 1 Gbps with downlink symmetry and uplink; Average PON port emission power: +2 dBm to +7 dBm; Light reception sensitivity of the PON port: not less than -30 dBm; Security: ONU authentication mechanism; Diameter of network coverage: 30 kilometers
• Standards: IEEE 802.3ah; IEEE 802.1D, Spanning Tree; IEEE 802.1Q, VLAN; IEEE 802.1w, RSTP; IEEE 802.3ad physical link static/dynamic aggregation (LACP); Ethernet – II, Ethernet – SNAP; IEEE 802.3ad VLAN stacking (Q in Q)
• Functions L3: Static route support
• QoS: Reverse flow control (half duplex); IEEE 802.3x flow control (full duplex); IEEE 802.1p, CoS; WR, SP and FIFO; “Mark/remark” priority support under 802.1P/DSCP; Uplink/downlink speed limit based on ONU; DBA and SLA
• VLAN: VLAN based on ports; GVRP; IEEE 802.1Q VLAN relay; QinQ and flexible QinQ
• Multicast: IGMP v1/v2/v3; IGMP snooping; Multicast VLAN and limited multicast
• Reliability: Unidirectional Link Detection (UDLD); EPON optical path protection; Hot swap; EAPS loopback protection function
• Network security: Limiting the maximum number of users on each port; Isolation of ports; Storm control; ACL based on stream; Encryption of transmission data on the PON interface
• Configuration management: Various management modes such as CLI, Web, SNMP, TELNET and cluster; RMONv1, group 1, group 2, group 3 and group 9; SSHv1/v2; Software and boot upgrade via TFTP and FTP; Local and server logs; Command line in English or Chinese; Network testing tools such as ping and traceroute; Debugging on exit

Interface

• PON ports: 6 GE ports (2 Gigabit RJ45 ports, 2 Combo ports, 2 Gigabit optical ports); 4 EPON ports

Environmental Specification

• Power supply: Input voltage: AC 100-240 V; Input frequency: 47-63 Hz; Support for power consumption from two power sources; Input current: 1 A/230 V; Electricity consumption: Up to 40 W
• Dimensions: 442 (length) x 315 (width) x 44 mm (height)
• Installation: 19-inch housing
• Weight: 2 kg
• Environmental conditions: Operating temperature: 0°C to 55°C; Storage temperature: -40°C to 80°C; Operating humidity: 10% -85%, no condensation; Storage humidity: 5% -95%, non-condensing