Wave AP Gen2 – 60 GHz + 5 GHz multipoint base station featuring 90-degree sectoral coverage, 31-client capacity, 2.7 Gbps symmetrical speed, and antenna connectors for 5 GHz range extension.

Mechanical
– Dimensions: 158.3 x 286.8 x 100.2 mm (6.2 x 11.3 x 3.9″)
– Weight: 1.5 kg (3.3 lb)
– Enclosure material: UV stabilized polycarbonate, aluminum alloy
– Pole mount diameter: 25.4 to 60 mm (1 to 2.4″) on pipe outer diameter
– Wind loading: 109.8 N at 200 km/h (25 lbf at 125 mph)
– Weatherproofing: IPX6

Hardware
– Processor: Quad-core ARM® Cortex®-A53 at 1.4 GHz
– Memory: DDR3L 512 MB
– Networking interface: (1) 2.5 GbE RJ45 port; (1) 10G SFP+ port
– Max. power consumption: 24W
– Power method: Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-); Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only
– Power supply: 48V DC, 0.65A 2.5 GbE PoE adapter (Included)
– Supported voltage range: 44–54V DC; 22–27V DC
– GPS: Yes
– Button: Factory reset
– LEDs: Power, Ethernet, GPS
– Ambient operating temperature: -40 to 60° C (-40 to 140° F)
– Ambient operating humidity: 5 to 95% noncondensing
– Certifications: CC, IC, CE

Software
– Operating mode: PtMP access point
– Ubiquiti specific features: Wave AI, discovery protocol
– Services: UISP, ping watchdog, NTP client, SNMP
– Tools: Antenna alignment, discovery utility, ping, trace route, speed test, cable test, site survey
– Network: Bridge mode
– Application requirements: UISP: Version 2.4.205 and later

System
– Total throughput: 5.4 Gbps
– Supported clients count: 31
– Max. range: Connecting to a Wave Pro: up to 6 km; Connecting to a Wave Long-Range: up to 6 km; Connecting to a Wave Nano: up to 4 km; Connecting to a Wave Pico: up to 0.9 km
– Encryption: WPA2-PSK (AES)

RF
– Operating frequency*: 57–71 GHz (*Depends on regulatory region”
– Channel bandwidth: 2160, 1080, 540 MHz
– Operating channels*: 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200, 70560 MHz (Depends on regulatory region)
– Modulation: 16QAM, QPSK
– Antenna gain: 20 dBi
– Polarization: Vertically linear
– Beamwidth: Azimuth: 3 dB 90°; Elevation: 3 dB 7°
– Electrical downtilt: 0°

Back-Up RF
– WiFi standard: 802.11ax (WiFi 6)
– Operating frequency (Depends on regulatory region)
– US/CA: U-NII-1 5150 – 5250 MHz; U-NII-2A 5250 – 5350 MHz; U-NII-2C 5470 – 5725 MHz; U-NII-3 5725 – 5850 MHz
– Worldwide: 5150 – 5875 MHz
– Channel bandwidth: 20, 40, 80 MHz
– Modulation: BPSK (1⁄2), QPSK (1⁄2), QPSK (3⁄4), 16QAM (1⁄2), 16QAM (3⁄4), 64QAM (2⁄3), 64QAM (3⁄4), 64QAM (5⁄6), 256QAM (3⁄4), 256QAM (5⁄6), 1024QAM (3⁄4), 1024QAM (5⁄6)
– Antenna gain: 13 dBi
– Cross-pol isolation: 18 dB
– Polarization: Dual-linear
– Beamwidth: Azimuth: 6 dB 95°
– Elevation: 6 dB 25°
– Electric downtilt: 0°

LEDs
– Power: Flashing white: bootup in progress; White:not connected to UISP application; Blue: connected to UISP application; Flashing blue: locate in progress; Blue/white: firmware upgrade in progress
– Ethernet: Flashing white: Ethernet traffic detected; Flashing blue: SFP+ traffic detected
– GPS: Blue: receiving at least (4) GPS satellite signal