Raspberry Pi Foundation – SC0370 – Raspberry Pi IQaudio DigiAMP+

47,52 

IQaudio DigiAMP+ DigiAMP+ is a HAT compliant add-on accessory for the Raspberry Pi. DigiAMP+ uses the Texas Instruments TAS5756M PowerDAC to deliver direct connection to PASSIVE stereo speakers at up to 2x 35wpc with variable output. Ideal for a Pi…

currently sold out
Out of stock
Bulk PriceQuantity (from)Quantity (to)
47,52  1 19
46,34  20 49
45,94  50 199
45,53  200
SKU 345840
EAN 4251877245483
MPN SC0370
Categories , , ,
Tags , , , ,

IQaudio DigiAMP+

DigiAMP+ is a HAT compliant add-on accessory for the Raspberry Pi.

DigiAMP+ uses the Texas Instruments TAS5756M PowerDAC to deliver direct connection to PASSIVE stereo speakers at up to 2x 35wpc with variable output. Ideal for a Pi based HiFi.

DigiAMP+ can be connected to the Raspberry Pi A+/B+/RPi2/RPi3 or RPi4’s 40-way pin header without any additional soldering.

DigiAMP+ must be powered from an external supply and requires a 12 to 24 DC power source to operate. DigiAMP+’s barrel connector is 5.5×2.5 mm. DigiAMP+ has been designed to provide power to the Raspberry Pi and DigiAMP+ combination in parallel, delivering 5.1 V @ 2.5 A to the Pi.

DO NOT APPLY POWER TO THE RASPBERRY PI’s OWN POWER INPUT WHEN USING DIGIAMP+.

The amplifier is by default muted at power on (mute LED lit). The mute state/LED is under software control (Raspberry Pi GPIO22).

  • P5: Alternative power input for hard wired installations. POLARITY MUST BE OBSERVED!
  • P8: TAS5756m internal GPIO1/2/3