Delock – 64301 – Delock converter M.2 Key M NVMe SSD to U.2 or M.2 Key B SATA SSD to SATA – who

This converter by Delock allows the installation of a M.2 PCIe NVMe SSD with Key M or a M.2 SATA SSD withKey B in 2280, 2260, 2242 and 2230 format. When using an NVMe SSD, the converter is connected to the U.2 interface, when using a SATA SSD to the SATA interface.

Suitable for 2.5″ bay The converter can be inserted into a 2.5″ bay of a docking station for HDD / SSD.

SSD installation without tools The special feature of this converter is that no tools are requiredto install the M.2 SSD. The SSD is inserted into the slot and secured to the board with a rubber nipple.

Good cooling
A connection to the inserted SSD is established on the top side, which is made of metal, via a heat conducting pad on the inside. This ensures good cooling of the SSD.

Technical data
– Connectors:
external:
1 x U.2 SFF-8639 connector
1 x SATA 6 Gb/s 22 pin connector
internal:
1 x M.2 Key M Slot
1 x M.2 Key B Slot
– Supports M.2 modules in 2280, 2260, 2242 and 2230 format with Key M, Key B or Key B+M on SATA or PCIe basis
– Maximum height of components on the module: 1.5 mm, use of double-sided modules possible
– Supports NVM Express (NVMe)
– Supports S.M.A.R.T.
– Supports TRIM – Supports S.M.A.R.T. Supports TRIM
– Dimensions (LxWxH): approx. 115 x 70 x 12 mm
– OS independent, no driver installation

required System requirements
– One free U.2 SFF-8639 interface or
– One free SATA 22 pin interface

Package contents
– Converter
– Screws
– Operating instructions

Packaging
– Retail box