FreePBX Ready System - APU2E5, 4 GB RAM, 16 GB mSATA SSD, blue

Deliverytime: 39 - 41 working days (Mo-Fr) *
309,35 EUR
Product Description

FreePBX Ready System - APU2E5, 4 GB RAM, 16 GB mSATA SSD, blue

FreePBX is a web-based open source GUI (graphical user interface) that controls and manages Asterisk (PBX), an open source communications server. FreePBX is licensed under the GNU General Public License (GPL), an open source licence. FreePBX can be installed manually or as part of the pre-configured FreePBX distro, which contains the operating system, Asterisk, FreePBX GUI and various dependencies.

Some of the features that FreePBX supports by default are:

  • Unlimited voice mailboxes
  • "Follow Me" function
  • Call groups with call confirmation
  • Unlimited number of conferences (limited by available CPU power)
  • Paging and intercom function for SIP phones that support it
  • Music on hold (via MP3s or streamed from the Internet)
  • Call queues
  • And many more

The FreePBX software runs on an energy-saving APU2E5 system, so the power consumption is a maximum of 10 watts. The system is fanless, passively cooled and extremely small.

Scope of delivery:

  • 1x server system
  • 1x 16 GB mSATA-SSD with pre-installed FreePBX software
  • 1x 12 V power supply unit
  • 1x network cable (1 m)
  • 1x indoor housing, blue
  • CPU: AMD Embedded G Series GX-412TC, 1 GHz Quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2 MB L2 cache
  • DRAM: 4 GB DDR3-1333 DRAM
  • Storage: boot from mSATA-SSD, SD card (internal sdhci controller) or external via USB, 1x SATA + power connector
  • 12 V DC, approx. 6 to 12 W depending on CPU load, power connector = 2.5 mm, centre positive
  • Connectivity: 3x Gigabit Ethernet channels (Intel i211 i211AT)
  • I/O: serial DB9 interface, 2x USB 3.0 external + 2x USB 2.0 internal, 3x LEDs on the front, push-buttons
  • Expansion: 2x miniPCI-express (1x with SIM connector), LPC bus, GPIO header, I2C bus, COM2 (3.3 V RXD/TXD)
  • Board size: 6 x 6 inch (152.4 x 152.4 mm) - same as apu1d, alix2d13 and wrap1e
  • Firmware: coreboot
  • Cooling: conductive cooling from the CPU to the case with a 3 mm aluminium heat spreader (included)
File type: pdf | File size: 752.69KB
This website uses cookies to ensure you get the best user experience. Privacy Policy