OPNsense Ready System - APU1D4, 4 GB RAM, 8 GB SD Card, 19" Rack Enclosure

Deliverytime: 1 - 4 Days *
278,29 EUR
There are currently no product reviews

Product Description

OPNsense Ready System - APU1D4, 4 GB RAM, 8 GB SD Card, 19" Rack Enclosure

The OPNsense software is based on FreeBSD(R), tailored for use as a firewall and router. It includes almost all the features of expensive commercial firewalls, and more in many cases. Here some supported features:

  • Firewall
  • State Table
  • NAT
  • Redundancy
  • Outbound and Inbound Load Balancing
  • VPN - IPsec, OpenVPN, PPTP
  • PPPoE Server
  • RRD Graphs Reporting
  • Real Time Information - Using AJAX
  • Dynamic DNS
  • Captive portal
  • DHCP Server and Relay
  • Live CD Version available

The OPNsense software is running on an energy saving APU1D4 system, so the power input averages 10 watt at maximum.
Current OPNsense version (64-bit).

Scope of delivery:

  • 1x server system
  • 1x 8 GB SD card with pre-installed OPNsense software
  • 1x 18 V power supply
  • 1x network cable (1m)
  • 1x enclosure


Technical Data (19" Rack):

  • Form factor: 19", 1HE
  • Dimensions: 440 x 300 x 43 mm
  • Front panel with preparations (160 x 35mm) for two board installation.
  • 4x holes for N connectors
  • RoHS conform (2002/95/EC)
  • Made in Germany

Technical Data:

  • Processor: 1,0 GHz AMD Embedded G-Series T40E APU (Dual-Core, 64-bit support, 32 + 32 KByte L1 Cache, 2 x 512 KByte L2 Cache, SSE1,2,3, SSSE3 ISA, SSE4A, MMX, AMD-V)
  • 4 GByte DDR3-1066 DRAM memory (not expandable)
  • 1x SD card (bootable, connected via USB)
  • 1x SATA 6 GBit/s
  • 1x mSATA 6 GBit/s
  • 3x 10/100/1000 MBit/s (Realtek RTL8111E) network ports
  • 1x 9-pin serial port (console port)
  • 2x Mini PCIe slots (for example for Wi-FI, GSM/UMTS/LTE modules)
  • 1x SIM socket for GSM/UMTS modules
  • RTC battery, GPIO pins, LPC pins, COM2 port (3,3V RxD/TxD), onboard USB connector
  • 3x LEDs and 1x pushbutton switch on the front side (programmable)
  • CoreBoot Open Source System BIOS with support for iPXE and USB boot
  • Power supply: +12 V DC via cannon plug (external: 5.5 mm, inner: 2.5 mm, positive pole on the inside)
  • Power consumption: 6 - 12 W (without expansion cards)
  • Dimensions: 152.4 x 152.4 mm


File type: pdf | File size: 4.14MB
This website uses cookies to ensure you get the best user experience. Privacy Policy