We remain available for you during the current situation and send your orders as usual.
Please note that due to local restrictions in some European countries service delays cannot be excluded.

Televes EKA1000SFP - CoaxData(TM) Ethernet Hybrid Adapter, 1 Gbps, RJ-45 & SFP

Deliverytime: 1 - 4 Days *
available: < 10
242,15 EUR
Quantity:
There are currently no product reviews
Key points at a glance:
Downloads

Product Description

Televes EKA1000SFP - CoaxData(TM) Ethernet Hybrid Adapter, 1 Gbps, RJ-45 & SFP

The CoaxData(TM) 1Gbps-HDTV can transmit IP data over coaxial cable
installations with coexistence of TV channels or other existing
services. The Coaxial Ethernet modem immediately connects multiple PCs
on the coaxial network or power line on your home, hotel or buildings
without additional cabling.

Televes provides two variants of product:

The CoaxData(TM) 1Gbps-HDTV EKA1000 incorporates a power supply, two "F"
connectors for TV and data connectors and two RJ-45 Ethernet
1000BASE-T/100BASE-TX/10BASE-T.

The CoaxData(TM) 1Gbps-HDTV EKA1000SFP incorporates an Ethernet 1000BASE-/100BASE-TX/10BASE-T and an SFP (according to MSA INF-8074i specification of the SFF Committee). This connector allows you to use Gigabit modules 1000BASE-LX/1000BASE-SX/1000BASE-CX or built-in SFP devices that support new protocols like EPON (IEEE 802.3ah) or GPON (ITU G.984) to integrate the CoaxData(TM) in fiber optic networks.

Main Features

  • IEEE 1901 compliant with HomePlug AV PHY that supports 2880 OFDM carriers with 4096/1024/256/64/16/8 QAM, QPSK, BPSK and ROBO mode capable of transmitting up to 700 Mbps and up to 350 Mbps physical rate of rate UDP over coax
  • Supports Quality of Service (QoS) and incorporates packet classification rules and multiple transmission queues
  • Advanced encryption (AES-128) to ensure security for their communications and private networking no other user can use the same network
  • Sharing access to high speed Internet, connect up to 253 modems in its distribution network, no hubs or switches are required, data travels on the chosen cable installation
  • Operating bandwith in the return channel from 2 to 67.5 MHz with a maximum attenuation of 85 dB supported, no requirement of minimum attenuation, reach distances greater than 1 km
  • Supports IGMPv3 multicast management streams for efficient implementation of IPTV or VoIP systems, allowing the management of up to 32 different channels

Specifications

  • General:
    • IP network adapter to coaxial infrastructure and power line
    • Modes HomeNetworking and MDU/MTU
    • Up to 253 devices per master in mode MDU/MTU
    • Supports multiple masters, up to 4, on the same frequency for a total of 1012 devices
    • Data frequency range: 2 to 67.5 MHz
    • TV frequency range: 87-2150 MHz
    • Maximum attenuation: 85 dB
    • Output signal: 130 dBuV
    • Power spectral density: -50 dBm/Hz
    • Low power spectral density: -135 dBm/Hz
    • Temperature range: -5°C to 45°C
  • Distance:
    • Coax cable: 1.2 Km
    • Power line: 300 m
  • LED:
    • LED on/off
    • Medium: Detection half coaxial/hybrid
    • Link: Link establishment and activity
    • 1000/100/10 Mbps: Ethernet link and activity
  • Standards:
    • IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T
    • HomePlugAV IEEE P1901
    • SFP with support for 802.3z 1000BASE-X
  • Modulation and channel codification:
    • Dynamic adaptation to channel conditions and frequency synchronization with the PLC network 50/60 Hz
    • 2880 OFDM carriers, QAM 4096/1024/256/64/16/8, QPSK, BPSK and ROBO mode
    • Automatic error correction based on FEC (forward error correction) and TCC (Turbo Convolutional Codes)
  • QoS:
    • Supports multicast, IGMP snooping, MLDv2/IGMPv3/IGMPv2
    • Four transmission queues prioritized
    • VLAN IEEE 802.1p prioritization
    • Type of Service (ToS) and COS (Class of Service)
    • Source/destination MAC address classifier
    • Source/destination IP address classifier
    • Other adjustable classifiers filters
  • AC and consumption:
    • 108-254 V~ 50/60 Hz
    • Consumption: Max. 6 Watts
    • Low power mode (advanced power management): Max. 1.8 Watts
  • Transfer methods:
    • HomeNetworking: Asynchronous mode based on CSMA/CA with low latencies
    • MxU: Token-based synchronous mode (Hidden Node) which synchronizes slave transmissions and supports long distances
  • Security:
    • Establishment of private networks using network key (NPW, network password key)
    • Privacy of communications using AES-128 encryption (NEK, network encrytion key)
    • Privacy settings on devices using AES-128 access key (NVAK, non-volatile access key)
  • Connectors:
    • Electric cable EURO
    • 2x "F" connectors 75 Ohm, low pass filter to the data (2 to 67.5 MHz) and high-pass filter for TV Services (87-2150 MHz)
    • 2x RJ45 ports for 1000/100/10Mbps, auto Ethernet MDI/MDIX
  • Normatives:
    • Compact design, robust and shielded that meets all applicable regulations
    • UNE-EN 60950-1:2007/AC:2012 product safety
    • UNE-EN 55022:2008 radio interference
    • UNE-EN 55024:2011 immunity requirements
    • UNE-EN 50412-2-1:2006 immunity requirements for low voltage installations for communications equipment over powerline

    Downloads

    File type: pdf | File size: 1.32MB
    File type: pdf | File size: 2.42MB
    This website uses cookies to ensure you get the best user experience. Privacy Policy