Teltonika Din Rail Power Supply

Teltonika Din Rail Power Supply

Power supply for rail mounting from Teltonika.

• Single output power20 W
• Input voltage range100-240 VAC 50/60 Hz
• DC output voltage12 V
• DC output current0~1.67 A
• Output ripple and noise120 mVp-p
• Line regulation+/-1 %
• Load regulation +/-1 %
• Efficiency80 %
• Adjustable range for DC voltage+/-1 %
• Test standardEN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
• EN55022:2010
• EN61000-3-2:2014
• EN61000-3-3:2013
• EN55024:2010/A1:2015
• Inrush currentCold start current 20 A/ 115 VAC; 40 A/ 230 VAC
• Overload protection105 % ~ 160 % cut off the output, automatic recovery
• Over voltage protection120 % ~ 140 % shut down O/P voltage, re-power on to recover
• Setup, rise, hold up time500 ms; 30 ms/ 230 VAC at full load; 1000 ms; 30 ms/ 115 VAC at full load
• Withstand voltageI/P-O/P: 1.5 kV; I/P-FG: 1.5 kV; O/P-FG: 0.5 kV 1 minute
• Isolation resistanceI/P-O/P I/P-FG O/P-FG: 500 VDC/ 1000 Mohms
• Working temperature-10 °C ~ +50 °C
• Mounting options35 mm DIN Rail