Indoor and outdoor intercom terminal for managing access requests for residential and commercial buildings.

Details
– Unlocking with NFC card, UniFi Identity Mobile App, PIN code or QR code
– Directory and doorbell for access request
– Coupling with multiple UniFi Intercom Viewers for remote access control
– Connection to the UniFi Access Hub series via PoE
– Weatherproof (outdoor -30 to 60° C)

Mechanical
– Dimensions: 324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1″)
– Weight: Device: 965 g (2.1 lb)
– Mount: 445 g (1 lb)
– Housing material: Aluminium alloy, UV-stabilised polycarbonate, glass
– Mounting material: Powder-coated stainless steel
– Mounting: Wall bracket, adapter for gooseneck base (included)
– Surface-mounted angle mounting, flush-mounted (optional)
– Sun protection kit (optional)
– Weather protection: IP65

Hardware
– Network interface: (1) GbE RJ45 connection
– Connectivity: Bluetooth 4.2 / NFC
– Power supply method: PoE
– Supported voltage range: 48V DC
– Max. Power consumption: 13W
– ESD/EMP protection: Air: ±15kV, Contact: ±8kV
– Sensors: Proximity sensor / ALS sensor
– Camera 3264 x 2448, 8 MP / H: 79.4°, V: 97.5°, T: 118.2°
– Display 177 mm (7″) diagonal
– Resolution 1024 x 600 (16:9)
– Display: Luminance max. 1000 nits (typical)
– Touchscreen technology: Capacitive multi-touch
– Microphone: Yes
– Speaker: (1) 4 Ohm, 2 W
– LEDs (1) LCM low temperature indicator: orange (LCM switches off when the temperature is below -25° C, but the system functions normally)
– (1) LED floodlight
– (13) LED backlight of the keypad
– Button (1) factory reset
– NFC frequency: 13.56 MHz
– NFC read range: < 30 mm
– NFC standards: ISO 14443A, 14443B, 15693
– NFC technology: NFC Tag 1,2,3,4,5, MIFARE Classic, MIFARE Plus, MIFARE Ultralight, MIFARE DESFire
– Operating ambient temperature device: -30 to 60° C (-22 to 140° F)
– Display:* -25 to 60° C (-13 to 140° F)
– Certifications: CE, FCC, IC

Software
– UniFi Access management application: version 1.22.17 and higher

*The display will turn off if the ambient temperature is above/below the operating temperature of the display, but other functions will remain functional. (Valid from firmware version 1.0.66)
Operating humidity 5 to 90 % non-condensing