G3 Gate Starter Kit

Starter kit with a Gate Hub, G3 Intercom, PoE++ adapter, and PoE++ over twisted pair extender for access control at a single gate with Touch Pass support.

Overview
In the Box: (1) Gate Hub; (1) G3 Intercom; (1) PoE++ adapter; (2) 2-wire Retrofit Extenders
Touch Pass: 10 free 1-year Touch Passes included

Gate Hub
Dimensions: 175 x 126 x 26 mm (6.9 x 5 x 1″)
Supported Doors: 1 gate, 1 side door
Input Terminals: (1) Gate exit request; (1) Gate position; (1) Side door exit; (1) Side door position; (1) Emergency
Power Method: PoE++; UL 294 Power-limited Class 2 PSU; UL 60950-1/62368-1 LPS/PS2 PSU
Enclosure Material: Polycarbonate
Mounting: DIN-rail (Included)
Weight: 460 g (1 lb)
Indoor and Outdoor Use: Indoor only: device itself; Outdoor: with waterproof junction box
NDAA Compliant: Yes
UL 294 Level: Destructive attack: Level I; Line security: Level I; Endurance: Level I; Standby power: Level I
Ambient Operating Temperature: -30 to 60° C (-22 to 104° F)
Ambient Operating Humidity: 5 to 90% noncondensing
Networking Interface: (5) 10/100/1000 Base-T
PoE Interface: (1) PoE++ input, 50V DC, 1A; (4) PoE outputs, 50V DC, Max. 28W
Max. Power Consumption: 22W (Without PoE output); 50W (With PoE output)
Digital Input: Gate exit request, gate position, side door exit request, side door position, emergency
Dry Output Relay: (2) Operator: rated 30V DC, up to 1A; (1) Aux: rated 30V DC, up to 1A
Powered Output Relay: Side door lock: 12V DC, up to 1A
LEDs: W/B
Button: (1) Factory-reset
Recommend Max. Cable Length: UA-Lock-Electric (400mA): 24 AWG length: 25 m (82 ft), 22 AWG length: 42 m (138 ft), 20 AWG length: 66 m (217 ft), 18 UACC-Cable-DoorLockRelay length: 100 m (328 ft); UA-Lock-Magnetic-540kg (500mA): 24 AWG length: 20 m (66 ft), 22 AWG length: 32 m (105 ft), 20 AWG length: 51 m (167 ft), 18 UACC-Cable-DoorLockRelay length: 80 m (262 ft); UA-Lock-Magnetic-270kg (800mA): 24 AWG length: 12 m (29 ft), 22 AWG length: 20 m (66 ft), 20 AWG length: 30 m (98 ft), 18 UACC-Cable-DoorLockRelay length: 46 m (151 ft); Other locks (1A): 24 AWG length: 9 m (30 ft), 22 AWG length: 15 m (49 ft), 20 AWG length: 24 m (79 ft), 18 UACC-Cable-DoorLockRelay length: 36 m (118 ft)
PoE Cabling Requirements: Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
UL 294 Statement: Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade: Grade assignment: I
Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level: UA-Hub-Gate, V01
Software Information: The software version can be checked at https://unifi.ui.com

G3 Intercom
Dimensions: 324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1″)
Integrated Camera: Yes
NFC Card & Keyfob Access: Yes
PIN Access: Yes
Apple/Google Wallet: Yes
Mobile Unlock: Yes
Two-Way Intercom & Doorbell Access: Yes
Weatherproofing: IP65
NDAA Compliant: Yes
UL 294 Level: Destructive attack: Level I; Line security: Level I; Endurance: Level I; Standby power: Level I
Weight: Device: 965 g (2.1 lb); Bracket: 445 g (1 lb)
Enclosure Material: Aluminum alloy, UV-stabilized polycarbonate, glass
Mount Material: Powder-coated stainless steel
Mounting: Wall mount, adapter to the gooseneck pedestal (Included); Surface angle, flush mount, sunshield kit (Optional)
Indoor and Outdoor Use: Yes
Ambient Operating Temperature: Device: -30 to 60° C (-22 to 140° F); Display: -25 to 60° C (-13 to 140° F)
Ambient Operating Humidity: 5 to 90% noncondensing
Networking Interface: (1) GbE RJ45 port
Connectivity: BLE 4.2; NFC
Power Method: PoE; UL 294 Power-limited Class 2 PSU; UL 60950-1/62368-1 LPS/PS2 PSU
Max. Power Consumption: 13W
Supported Voltage Range: 48V DC
Sensors: Proximity sensor, ALS sensor
Display: 177 mm (7″) diagonal
Touch Screen Technology: Capacitive multi-touch
Display Luminance: Max. 1000 nits (Typical)
Resolution: 1024 x 600 px
Microphone: Yes
Speaker: (1) Yes, 2W
NFC Frequency: 13.56 MHz
NFC Read Range: < 30 mm (1.18”)
NFC Technology: ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340); MIFARE Classic / MIFARE DESFIRE; Sony FeliCa™ (ID only); NFC Forum tags T1T, T2T, T3T, T4T and T5T; ECP 2.0
LEDs: Amber Learn More
Buttons: (1) Factory-reset
PoE Cabling Requirements: Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
UL 294 Statement: Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade: Grade assignment: I
Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level: UA-G3-Intercom, V01
Software Information: The software version can be checked at https://unifi.ui.com

Retrofit Extender
Dimensions: PoE in/out: 40 x 105 x 25 mm (1.6 x 4.1 x 1″)
Adapter: 43.5 x 138 x 30 mm (1.7 x 5.4 x 1.2″)
Weight: PoE in: 77 g (2.7 oz); PoE out: 79 g (2.8 oz); Adapter: 140 g (4.9 oz)
Enclosure Material: Polycarbonate
Mount Material: Polycarbonate
Coaxial Connector: BNC female
Networking Interface: (1) 10/100 MbE, (1) Homeplug AV
Power Method: PoE++
PoE Interface: PoE in: (1) PoE++, 50V DC, 1.2A; PoE out: (1) PoE+, 48V DC, 0.6A
Max. Power Consumption: 3W (Without PoE output)
ESD/EMP Protection: Air: ±8kV, contact: ±4kV
LEDs: White
Ambient Operating Temperature: -10 to 40° C (14 to 104° F)
Ambient Operating Humidity: 5 to 90% noncondensing
NDAA Compliant: Yes
Certifications: CE, FCC, IC

PoE++ Adapter
Model: U-PoE++
Dimensions: 106 x 63 x 34 mm (4.2 x 2.5 x 1.3″)
Weight: 210 g (7.4 oz)
Output Voltage: 48V DC @ 1.25A
Gigabit LAN Port: Yes
Rated Voltage: 100—240V AC @ 50/60Hz
Input Current: 1.3A @ 120V AC; 0.75A @ 230V AC
Inrush Current: <100A peak @ 120V AC; <200A peak @ 230V AC
Efficiency: 85+%
Output Ripple: 1% max.
Switching Frequency: 65 kHz
Line Regulation: ≤ 1%
Load Regulation: ≤ 3%
4-pair Powering: Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-)
AC Connector: IEC-320 C6
Data In / PoE: RJ45 shielded socket
Surge Protection: Difference and common mode
Clamping Protection: 11V data, 60V power
Max. Surge Discharge: 1500A (8/20 μs) power
Peak Pulse Current: 36A (10/1000 μs) data
Shunt Capacitance: <5 pF data
Response Time: <1 ns
Power Method: Universal AC input, 100—240V AC, 50/60 Hz
Power Supply: AC/DC
Supported Voltage Range: 100—240V AC
Max. PoE+ Wattage per Port by PSE: 60W
Ambient Storage Temperature: -30 to 70°C (-22 to 158° F)
Ambient Operating Temperature: 0 to 40° C (32 to 104° F)
Ambient Operating Humidity: 10 to 95% noncondensing
Certifications: CE, FCC, IC, UL, UKCA, KC, CCC, KC, RoHS
NDAA Compliant: Yes