LTE Backup Pro – Seamless internet failover for UniFi gateways. Bring your own AT&T nano-SIM for LTE data.

Mechanical
– Dimensions: 66 x 202 x 32 mm (2.6 x 8 x 1.3″)
– Weight: Without stand: 223 g (7.9 oz); With stand: 336 g (11.9 oz)
– Enclosure material: Polycarbonate
– Mount material: Stand: aluminium
– Wall mount: polycarbonate

Hardware
– Processor: 74 Kc MIPS processor at 775 MHz
– Memory: 128 MB DDR2
– Networking interface: (2) GbE RJ45 ports; LTE Category 4 radio
– Management interface: Ethernet
– PoE interface: (1) PoE in (PoE output not used); (1) PoE passthrough output (Requires a PoE+ switch)
– SIM: nano-SIM (Data-only.)
– LTE bands: B2, B4, B5, B12, B14, B66
– Operator: AT&T network* (US only.)
– Power supply: UniFi PoE switch; 48V, 0.5A PoE adapter
– Supported voltage range: 44—57V DC
– Max. power consumption: Excluding PoE passthrough output: 8.5W
– Max. PoE passthrough wattage per port: 15.4W (Requires a PoE+ switch)
– MIMO: 2 x 2 LTE Category 4
– Throughput speeds: Download 150 Mbps / Upload 50 Mbps (Speed and coverage depend on location and network performance.)
– Antenna: (2) Internal LTE antennas; (1) Female RP-SMA connector for an external antenna (optional) (The maximum antenna gain must not exceed 6 dBi to comply with regulation.)
– External antenna port: Female RP-SMA connector (Please use male RP-SMA antennas to match the U LTE Backup Pro.)
– LCM display: 1.54″ screen
– Button: Factory reset
– Mounting: Wall mount or foot stand (Included)
– Ambient operating temperature: -10 to 60° C (-14 to 140° F)
– Ambient operating humidity: 5 to 95% noncondensing
– Certifications: FCC, IC
– NDAA Compliant: Yes

Software
– Management application: UniFi Network: Version 7.2.85 and later