19″ cabinet, rotatable frame, 32 U, 800 x 800 mm

Model: ROA-32-A88-CAX-A1

Cabinet with internal rotating frame, octagonal floor plan, IP20 protection and a load capacity of 250 kg.

Cable Entries

Cable entries are located in the side walls of the top and bottom part. The cables are protected by a solid wire basket.

Flexible door opening

The hinge system allows the door to be opened up to 180°. It can also be easily removed.

TRITON handles

Triton manufactures its own handles for free-standing cabinets. By replacing the plastic module (not included), a classic or semi-cylindrical lock can be used. Patent: PUV 2013-27443

Adjustable vertical rails

There are two pairs of 19″ rails each on the left and right side that can be adjusted within a range of 40 mm backwards or forwards. The maximum installation depth of the 19″ components is 550 mm in cabinets of 800×800 mm and 650 mm for 900×900 mm cabinets.

Removable side and rear panels

The removable side and rear panels allow for an easy access to the installed components. They are secured with the same lock as the front door.

Measurements:

• Height 1850 mm x width 800 mm x depth 800 mm

• 19″ free-standing cabinet with IP20 protection.
• Cabinet construction: Welded steel frame with removable walls; Door glass: 4 mm thick safety glass.
• The permissible load capacity of the door is 20 kg max.
• The minimum thickness of the surface finish is 65 m.
• These cabinets are designed for the installation of data and telecommunication systems and their distribution systems.
• The cabinet has a rotating 19″ frame inside for installing components, as well as adjustable vertical rails. The frame can be rotated up to 180° in both directions.
• The frame of the cabinet and all removable parts (side and rear walls, doors, …) are connected to grounding cables that must be properly fastened and plugged in throughout the use of the cabinet.
• There is one M8 screw at the bottom of the distributor as the main grounding point.
• Cable entries with break-out blanking panels are located at the top and bottom part of the cabinet.