19″ Standing Cabinet for Air Conditioning, 32 U, 800 x 800 mm, IP 54

Model: RIE-32-A88-CCX-A1

Welded standing cabinet removable side panels for installing air-conditioning units, with glass door, three-point lock, IP54 protection and a load capacity of 400 kg.

Cable inputs

Cable inputs in the upper and lower part are 300 x 100 mm in size and sealed by blanks. Included with the cabinet is one multiple wire bushing with high protection coverage.

Ceiling panels

Large ceiling breakout panels allow the installation of air-conditioning units with the airflow directed exactly as required. Installation of air-conditioning lowers the IP protection of the entire system to IP20.

IP54 cabinet

RIE series cabinets with increased protection are intended to protect the equipment particularly from harmful effects of water and dust. Ceiling perforations do not reduce the impermeability of the cabinet. The side panels are bolted to the frame and have the same foam seal as the door. The covers have holes which allow the cabinets to be joined together.

Multipoint locking system

Lock with a sliding locking system ensures a perfect door seal with the cabinet frame. The system is compatible with handles and locks of all major manufacturers including electronic and coded locks.

Adjustable vertical rails

For cabinets deeper than 800 mm, the two pairs of fully adjustable 19 vertical rails are supplemented with a third pair of middle rails.

Measurements:

• Height 1525 mm x width 800 mm x depth 800 mm

Supply includes:

• 2x key – front door
• 16x captive nut M6
• 16x screw M6x10
• 16x plastic washer
• 4x adjustable feet
• 4x nut M10
• 1x cable entry RAX-PB-X10-X1

Material:

• Safety glass, tempered, 4 mm thick
• Deep drawn sheet steel

• 19″ free-standing cabinet with IP54 protection
• Cabinet includes 4 sliding vertical rails for device mounting (6 rails for cabinets deeper than 800 mm)
• Cabinet construction: Welded steel frame with removable side panels fixed by screws, single door sealed by foam gasket in all metal versions or glazed with safety tempered glass 4 mm. They can be on the front or back of the cabinet. To achieve needed protection the doors with 3-point locking system are standard for this model.
• Max. permissible load of the door is 20 kg
• These cabinets are intended for installation of data and telecommunication devices and their distribution systems
• The frame of the cabinet and all the removable parts (side and rear covers, doors) are connected with grounding cables that have to be properly attached and inserted into the connectors at all times while using the cabinet
• There is one M8 screw placed at the bottom part of the cabinet as a grounding point
• Cable entries with removable covers are located at the top and the bottom part of the cabinet