RUT206 INDUSTRIAL 4G ROUTER
Der RUT206 ist ein kompakter Industrial Router, der sowohl RS232- als auch RS485-Schnittstellen unterstützt und mit aktiven und passiven PoE Inputs ausgestattet ist. Sein robustes Design, ein 2-poliger Stromeingang und die Möglichkeit, den Datenspeicher über einen microSD-Slot zu erweitern, machen ihn zur idealen Wahl für eine Vielzahl von IoT- und M2M-Anwendungen. Dieser 4G Cat 4 Router ist mit der Open Source Software RutOS ausgestattet und unterstützt wichtige Industrieprotokolle wie Modbus, DNP3 und DLMS.

– KONNEKTIVITÄT: 4G Cat 4, 3G, 2G
– SERIELLE SCHNITTSTELLEN: RS232 & RS485 für serielle Kommunikation
– 2-POLIGER STROMEINGANG: Einfach und für industrielle Anwendungen geeignet
– PoE: Aktive und passive PoE Inputs

FEATURES

Mobile
– Mobile module: 4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps
– 3GPP Release: Release 9
– SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, nonetwork, network denied, data connection fail, SIM idle protection
– Status: IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
– SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
– USSD: Supports sending and reading Unstructured Supplementary Service Data messages
– Black/White list: Operator black/white list (by country or separate operators)
– Band management: Band lock, Used band status display
– SIM idle protection service: When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then
– SIM PIN code management: SIM PIN code management enables setting, changing, or disabling the SIM card’s PIN
– APN: Auto APN
– Bridge: Direct connection (bridge) between mobile ISP and device on LAN
– Passthrough Router: assigns its mobile WAN IP address to another device on LAN

Wireless
– Wireless mode: 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
– Wi-Fi security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with
PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
– SSID/ESSID: SSID stealth mode and access control based on MAC address
– Wi-Fi users: Up to 50 simultaneous connections
– Wireless Connectivity: Features Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
– Wireless MAC filter: Allowlist, blocklist
– Wireless QR code generator: Once scanned, a user will automatically enter your network without needing to input login information
– TravelMate: Forward Wi-Fi hotspot landing page to a subsequent connected device

Ethernet
– WAN: 1 x WAN port 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
– LAN 1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Network
– Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based
routing
– Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake on Lan (WOL), VXLAN
– VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
– Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
– Firewall: Port forward, traffic rules, custom rules, TTL target customisation
– Firewall status page: View all your Firewall statistics, rules, and rule counters
– Ports management: View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
– Network topology: Visual representation of your network, showing which devices are connected to which other devices
– DHCP: Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status,
static leases: MAC with wildcards
– QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
– DDNS: Supported >25 service providers, others can be configured manually
– DNS over HTTPS DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
– Network backup: Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
– Load balancing Balance Internet traffic over multiple WAN connections
– Hotspot: aptive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
– Hotspot 2.0: Hotspot 2.0 is a Wi-Fi standard that enables seamless, secure, and automatic connection to trusted wireless networks
– SSHFS: Possibility to mount remote file system via SSH protocol
– Traffic Management Real-time monitoring, wireless signal charts, traffic usage history

Security
– Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External, RADIUS users authentication, IP & login attempts block, time-based login blocking,built-in random password generator
– Firewall: Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
– Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
– VLAN: Port and tag-based VLAN separation
– Mobile quota control: Mobile data limit, customizable period, start time, warning limit, phone number
– WEB filter: Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
– Access control: Flexible access control of SSH, Web interface, CLI and Telnet
– SSL certificate generation: Let’s Encrypt and SCEP certificate generation methods
– 802.1x: Port-based network access control serve

VPN
– OpenVPN: Multiple clients and a server can run simultaneously, 27 encryption methods
– OpenVPN Encryption DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
– IPsec: XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12,
AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
– GRE: GRE tunnel, GRE tunnel over IPsec support
– PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
– Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
– DMVPN Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
– SSTP: SSTP client instance support
– ZeroTier: ZeroTier VPN client support
– WireGuard: WireGuard VPN client and server support
– Tinc: inc offers encryption, authentication and compression in it’s tunnels. Client and server support.

BACNET
– Supported modes: Router
– Supported connection types: RS485, TCP

OPC UA
– Supported modes: Client, Server
– Supported connection types: TCP

MODBUS
– Supported modes: Server, Client
– Supported connection types: RTU, TCP
– Custom registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
– Supported data formats 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

DATA TO SERVER
– Protoco: l HTTP(S), MQTT, Azure MQTT
– Data to server: Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router’s Data to server feature

MQTT Gateway
– Modbus MQTT Gateway Allows sending commands and receiving data from MODBUS Server through MQTT
broker

DNP3
– Supported modes: TCP Master, DNP3 Outstation
– Supported connection types: RS232, RS485, TCP

DLMS
– DLMS Support: DLMS – standard protocol for utility meter data exchange
– Supported modes: Client
– Supported connection types: TCP
– COSEM: Allows to scan meter COSEM objects for automatic detection and configuration

API
-Teltonika Networks Web API (beta) support: Expand your device’s possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation:
https://developers.teltonika-networks.com