Stub socket 3 connections: FM/TV-SAT1-SAT2

Stub socket with three connections and two inputs. Equipped with two F plugs: SAT1 for the satellite signal corresponding to input 1 (filtered) and SAT2 for the satellite signal corresponding to input 2 (full bandwidth 5-2400 MHz). The IEC connector is intended for radio (FM) and DVB-T/T2 from input 1
The lower part of the housing frame is open.

Highlights

– Built-in separation filter: the SAT signal is filtered in the FM/TV IEC connection, while the terrestrial FM/TV signal is filtered in the satellite connection (SAT1).
– Robot-controlled automated production/li>
– High shielding
– Excellent decoupling between the outputs

Features

– Die-cast housing
– DC feed-through from the SAT connection to the input
– Compatible with coaxial cables with sheath diameters ranging from 5 to 6.9 mm (Ø 5…6.9 mm)

Good to know

Televes antenna sockets with plug-in technology
Advantages of the class A antenna sockets:

– The inner conductor is simply connected by pressing without the need for screws. The inner conductor can thus be detached several times

– Can be used for inner conductor diameters from 0.65 mm to 1.2 mm and external cable diameters from 5 mm to 6.9 mm

– Conical F connection for easy insertion of the inner conductor

– Specially fixed claws to simplify installation (strong, stable and long). Very low installation depth.
– Lockable hinged clamp remains in position even when installed horizontally!

– The clamp is equipped with 3 serrated rows in 9mm for perfect fixing of the braid
– Third keyhole for better fixing
Cleanly rounded edges to protect against injury

– Complies with shielding class A

This product range also includes helpful printing on the housing:

– CE mark
– Numerical and logical designation of the antenna socket type
– Representation of inputs and outputs
– Dimensional information for stripping the cable