PHPoC PA-FEU – Power adapter, wall-mount type, EU plug, 2 conductors

Power adapter with EU plug for use in Denmark, France, Germany, Russia, Chile etc.

Mechanical Specifications

• Dimensions: 67 (L) x 26 (W) x 72.2 (H) mm maximum
• Weight: 80 g maximum
• Output cord:
• Wire: 22 AWG/2C 2468, 1800 mm
• Plug: Jack plug 5.5 x 2.1 x 9.5 mm

AC Input Requirements

• AC input voltage
• Minimum: 90 V AC
• Nominal: 100-240 V AC
• Maximum: 264 V AC
• AC input frequency
• Minimum: 47 Hz
• Nominal: 50 / 60 Hz
• Maximum: 63 Hz

Output Requirements

• DC output voltage: +5 V
• Minimum load current: 0.05 A
• Nominal load current: 1 A
• Nominal output power: 5 W
• Total output regulation: +/- 5 %
• Line regulation: +/- 5 % at nominal input voltage and full load
• Ripple and noise:
• 300 mVp-p maximum at 20 MHz, and output parallel with 0.1uF & 10uF capacitors to ground
• Temperature at 25°C at 115/230 V AC input voltage
• Average efficiency:
• 68.17% minimum
• Meets standard for Energy Star Level: V
• ERP: 2009/125/EC
• Hold-Up Time: 5 ms minimum at nominal input AC voltage and full load
• Turn-On Delay: 2 seconds maximum
• Protection:
• Over-current protection: 2 A maximum with auto-recovery function
• Over-voltage protection: 10 V DC maximum
• Short-circuit protection: The adapter shall not be damaged by short the DC output to ground.
• Remark: Unless otherwise specified, output load must set at CR mode.

Environmental Specifications

• Cooling: Cooling shall be with natural convection cooling
• Operating temperature: 0°C to 40°C
• Storage temperature: -20°C to +60°C
• Operating humidity: 20 ~ 85 % RH. non-condesning
• Storage humidity: 5 ~ 95 % RH. non-condesning
• Vibration test requirement (non-operating, with packing): Reference to IEC. 68-2-6