The wAP LR9G kit is a rugged, out-of-the-box LoRa® gateway built into MikroTik’s proven wAP form factor. It features:

– LoRa® 915 MHz support
– Built-in GPS (via MT3337V)
– Improved Rx sensitivity: up to -141 dBm
– 2.4 GHz Wi-Fi (802.11b/g/n dual-chain)
– Passive PoE support and wide voltage input range
– 3 power input options: PoE, automotive, or DC jack
– SMA female connectors for external antenna options

Pair it with any public or private LoRa® network (including The Things Network or The Things Industries) using the preinstalled UDP packet forwarder. Whether you’re deploying smart irrigation in a field or setting up a LoRa® node on a building rooftop – this device is made to withstand the elements and simplify setup.

*) the device has no built in LTE modem, the SIM slot can only be used, if LoRa interface card is removed and replaced by an LTE modem

Specifications:
– Product code: RBwAPR-2nD&R11e-LR9G
– Architecture: MIPSBE
– CPU: QCA9531
– CPU core count: 1
– CPU nominal frequency: 650 MHz
– RouterOS license: 4
– Operating System: RouterOS v7
– Size of RAM: 64 MB
– Storage size: 16 MB
– Storage type: FLASH
– MTBF: Approximately 200’000 hours at 25C
– Tested ambient temperature: -40°C to 60°C

Powering:
– Number of DC inputs: 3 (DC jack, PoE-IN, Automotive)
– DC jack input Voltage: 9-28 V
– Automotive input Voltage: 12-30 V
– Max power consumption: 7 W
– Cooling type: Passive
– PoE in: Passive PoE
– PoE in input Voltage: 9-28 V

Wireless specifications:
– Wireless 2.4 GHz Max data rate: 300 Mbit/s
– Wireless 2.4 GHz number of chains: 2
– Wireless 2.4 GHz standards: 802.11b/g/n
– Antenna gain dBi for 2.4 GHz: 2
– Wireless 2.4 GHz chip model: QCA9531
– Wireless 2.4 GHz generation: Wi-Fi 4

Ethernet:
– 10/100 Ethernet ports: 1

Peripherals:
– Number of SIM slots: 1 Modem (Mini SIM)
– MiniPCI-e slots: 1

Other:
– PCB temperature monitor: Yes
– Voltage Monitor: Yes
– GPS RF connector type: uUFL

Certification & Approvals:
– Certification: FCC, IC, EAC
– IP: 54