With this Qi-certified holder fromDelock, a mobile device can be charged wirelessly in the car. No charging cables are required for energy transfer by induction and the connectors are protected. The charger supports fast charging up to15 watts forappropriately equipped smartphones.

Active cooling
The cooling of thecradle ensures that the mobile phone does not overheat and switch off even during prolonged use, such as navigation.

Smart Touch buttons
When the phone is placed in the holder, the fastening arms close automatically and hold the mobile device firmly in place. To release them, there are two buttons on the side, which are also used to extend or retract the mounting arms using a motor. The lower holder can be extended manually so that larger phones can also be accommodated.

Technical data
– Connection: 1 x USB Type-C™ socket
– Input voltage: 12.0 V / 2.0 A
– Charging power: 5.0 V / 1.0 A (5.0 W), 7.5 V / 1.0 A (7.5 W), 9.0 V / 1.12 A (10.0 W), 12.0 V / 1.25 A (15.0 W)
– Frequency range: 110 – 205 kHz
– Transmission power: max. 15 W
– 1 x LED for power
– Operating temperature: -10 °C ~ 40 °C
– Storage temperature: -20 °C ~ 40 °C
– Relative humidity: 5 – 95 % (non-condensing)
– Transmission distance: 3.5 mm
– With suction cup holder
– Ventilation slot clip
– FOD (Foreign Object Detection): yes
– Colour: black / grey
– Suitable for mobile devices up to approx. 90 mm wide
– Weight: approx. 174 g
– Dimensions (LxWxH): approx. 130 x 100 x 75 mm

Package contents
– Holder
– Telescopic arm with suction cup
– Ventilation slot clip
– 2 x fastening nuts
– Charging cable USB type A plug to USB-C™ plug, length approx. 1 m
– Operating instructions

Packaging
– Retail box