Delock IoT LoRa Radio Module – 868 MHz, 30 dBm, TTL (3.3 V), SMT > MHF(R) I jack

This highly energy-efficient IoT LoRa radiomodule by Delock is suitable for LPWAN, M2M, IoT or Industry 4.0 applications. Via the UART TTL interface components such as sensors, controllers, GNSS trackers, LoRaWAN gateways etc. can be equipped with this LoRa compatible radio module. Due to the flexible output power of the module, a wide spectrum of antennas and thus a large transmission/ reception range is possible.

The LoRa data are always transmitted encrypted in a secure radio network and thus remain protected from unauthorized access. The IoT LoRa module supports four energy-saving modes and, with its very low power consumption (5 A), is suitable for use with rechargeable batteries. There are four power levels available on the RF output of the IoT LoRa module for the antenna.

The module can detect radio interference automatically and actively prevent transmission errors. This ensures error-free data transmission and secures the range of the transmission.

• System requirements: Antenna with MHF(R) I plug, controller with TTL (3.3 V) interface
• Package content: Module
• Package: Box

• Connectors: 1x MHF(R) I jack, 1x 18 pin SMT
• Pitch: 1.27 mm
• Chipset: Semtech SX1276
• Interface: UART TTL (3.3 V)
• FIFO: 2x 512 byte
• Frequency range: 862 – 893 MHz
• Channels: 32
• Sensitivity: -146 dBm at 2.4 Kbps
• Transmission power: 21 – 30 dBm
• Air data rate: 0.3, 1.2, 2.4, 4.8, 9.6, 19.2 Kbps
• Energy modes: (Normal, Wake-up, Power-saving, Sleep)
• Supports: WOR (Wake On Radio), FEC (Forward Error Correction)
• Power supply: 3.3 – 5.2 V
• Current consumption: 600 mA at 30 dBm
• Operating temperature: -40°C ~ 85°C
• Relative humidity: 10 – 90 % (non condensing)
• Dimensions (L x W x H): ca. 40 x 25 x 3.7 mm
• Weight: ca. 6 g