CyberPower PR1500ERTXL2UCensuresthe highest quality power supply protection for IT devices such as computers, workstations, servers, NAS / storage devices, network devices or telecommunication devices, but also for home cinema systems, multimedia devices and video surveillance systems. The UPS can be installed as a rackmount or in a tower design.

It uses the line-interactive topology with automatic voltage regulation (AVR) and offers a stabilised sine wave output supply in mains and battery operation to ensure a high power supply quality.

The output power factor of the UPS is 1, which means that more devices/loads can be connected to the UPS than to UPSs with a lower power factor.

It has an intelligent BMS battery management system that helps to achieve a longer battery life by adjusting the charging voltage to the individual batteries and thus optimising charging.

The fast charging technology enables fast and safe charging of the batteries.

The rotatable multifunctional matrix LCD supports intuitive operation and enables configuration of UPS options.

In the XL versions, external battery extensions can be connected to the UPS to extend the runtimes in emergency operation.

Features
– Line-interactive UPS topology
– Active PFC-compatible
– Tool-free battery replacement
– High output power factor
– Overload protection
– Fast charging technology
– External battery extension (EBM)
– EMI and RFI filter
– USB communication portcommunication port
– Emergency Power Off (EPO) port
– SNMP / HTTP remote management capability (optional)
– Energy saving technology
– Pure sine wave supply
– Battery management technology
– Automatic Voltage Regulation (AVR)
– Critical / non-critical outputs Critical / non-critical outputs
– Hot-swappable batteries
– Overvoltage and lightning protection
– LCD status display
– Serial communication port
– PowerPanel management software
– Built-in remote cloud card Ethernet

What is included
– PR1500ERTXL2UC UPS
– Rackmount rails
– Rackmount bracket
– Rack rail kit
– Screw set
– IEC extension
– USB cable
– EPO cable
– User manual

Specification
General
Phase
– Single-phase
Enclosure type
– Rack, Tower
UPS Topology
– Line-interactive
Energy saving technology
– GreenPower UPS™ Bypass technology
Active PFC compatibility
– Yes

Input
Nominal input voltage ( Vac )
– 200
– 208
– 220
– 230
– 240
Input voltage range (at specific voltages)
– For 220/230/240V supply: 159 ~ 288 Vac
– With 200/208V supply: 148 ~ 254 Vac
Adjustable voltage range ( Vac )
– With 220/230/240V supply: 151 ~ 302 Vac
– With 200/208V supply: 131 ~ 268 Vac
Input frequency ( Hz )
– 50 ± 3
– 60 ± 3
Input frequency detection
– Auto detection
Rated input current ( A )
– 10
Input plug type
– IEC C14
Detachable IEC extension
– IEC C14 x 1
Length of power cord (ft.)
– 6
Length of power cord (m.)
– 1.8

Output
Power (VA)
– 1500
Power (Watt)
– 1500
Waveform battery operation
– Pure sine wave
Output voltage ( Vac )
– 200 ± 5 %
– 208 ± 5 %
– 220 ± 5 %
– 230 ± 5 %
– 240 ± 5 %
Frequency battery operation ( Hz )
– 50 ± 1%
– 60 ± 1%
Power factor
– 1
Automatic voltage regulation (AVR)
– Double boost, Single buck
Overload protection
– Internal current limiting, automatic circuit breaker
Output – Total
– 10
Outputs
– IEC C13 x 10
Output – Battery backup & overvoltage protection Overvoltage protection
– 10
Output – Critical load (CL)
– 5
Output – Non-critical load (NCL)
– 5
Typical switching time ( ms )
– 6 (at normal sensitivity)

Battery
Runtime at half load ( min )
– 19.3
Running time at full load ( min )
– 6.5
Typical recharge time ( hours )
– 3 (recharge up to 90% after complete discharge)
Start in battery mode
– Yes
Built-in battery management module
– Yes
User replaceable
– Yes
Hot-swappable
– Yes
Battery type
– maintenance-free lead-gel
Replacement battery set RBP
– RBP0129
Replacement battery RBP Quantity ( pcs )
– 1
Number of battery(ies) (per RBP) ( pcs )
– 4
Compatible External Battery Module (EBM)
– BP48VP2U02 (built-in charger)
Max. EBM Quantity ( pcs )
– 10

Filter & Overvoltage Protection
Overvoltage Protection ( Joules )
– 2430
EMI and RFI Filter
– Yes

Management & Communication
LCD Display
– Yes
LCD Orientation
– Rotatable LCD – Manual
LCD Display
– Operation Mode, Power Display, Battery Status, Load Status, Fault & Warning, Event & Log Warning, More Information, Event & Log
LCD Setting & Control
– Mode Settings, Alarm Setting, Input & Output, Battery Settings, Communication, Language Output, Battery Settings, Communication, Language
LED Indicators
– Operation Status, Mains Operation, Battery Operation, UPS Fault, Battery error
HID-compatible USB port
– 1
Serial port
– RS232
Switching contact (relay)
– Yes
Emergency power off (EPO) port
– Yes
Audible alarms
– Battery operation, Low battery status, Overload, Overcharge
Management cable ( pcs )
– IEC extension x2, USB cable x1, EPO cable x1
Management software
– PowerPanel Business 4 (Recommended)
SNMP / HTTP remote monitoring
– Yes – with optional RMCARD205
Remote cloud card
– Yes – Built-in remote cloud card Ethernet included
PowerPanel Cloud service
– Yes – 90 days (UPS) free trial + 3 years (remote cloud card) free service

Physical
Enclosure Construction
– Metal
Colour
– Black
Rack Rails
– Yes
Rack Bracket
– Yes

Physical Size – UPS Unit
Dimension (WxHxD) (in.)
– 17.1 x 3.4 x 19.7
Dimension (WxHxD) (mm.)
– 433 x 86.5 x 500
Weight (lbs.)
– 70.6
Weight (kg.)
– 32
Installed rack height ( U )
– 2

Shipping dimensions
Dimension (WxHxD) (in.)
– 22.1 x 10.8 x 24.4
Dimensions (WxHxD) (mm.)
– 560 x 275 x 620
Weight (lbs.)
– 85.6
Weight (kg.)
– 38.8

Environment
Operating temperature (°F)
– 32 ~ 104
Operating temperature (°C)
– 0 ~ 40
Relative operating humidity (non-condensing) ( % )
– 0 ~ 95
Operating altitude ( feet/metre )
– 0-3,000 metres
Storage temperature (° F)
– 5 ~ 113
Storage temperature (° C)
– -15 ~ 45
Storage Relative humidity (non-condensing) ( % )
– 0 ~ 95
Storage altitude ( Feet/Metre )
– 0-15,000 metres
Online Thermal losses ( BTU/std )
– 96.7

Certifications
Certifications
– CE, FCC Class B, UL, cUL, VCCI
RoHS
– Yes