PDU32SWHVCEE18ATNET – Switched ATS PDU, 18x Outlets

CyberPower PDU32SWHVCEE18ATNET provides output from a UPS unit, generator, or utility power to multiple connected devices in IT environments. Dual power cords can be plugged into separate power sources to provide redundancy to single-corded connected equipment. If the selected power source exceeds the desired thresholds or fails, the PDU will automatically switch to the other power source to ensure continuous operation. The unit supports remote individual outlet control over the network, allowing administrators to turn on/off connected devices from any location.

The product includes a Remote Management Card. With the SNMP card and an IP address on the network interface, users have access to real-time monitoring of the ATS PDU. The power management web interface offers real-time remote monitoring of the PDU vitals of the outlets of networked clients. Event logging via a web browser or network connection allows users to review the history of power conditions. When specified power events occur, automatic event notifications will be sent via email, SMS text, or SNMP trap to designated users so that they can take immediate actions. The featured RJ45 port enables the connection of the optional environmental sensor (ENVIROSENSOR), which can provide real-time temperature and humidity monitoring in an IT center.

The product is also certified to be interoperable and compatible with Cisco Compatible™ network environments, which helps to achieve the best energy performance possible in the datacenter scenario.

General

• Type: Switched
• Phase: Single phase

Input

• Dual power inputs: Yes
• Nominal input voltage (Vac): 200 ~ 240
• Input frequency (Hz): 50/60
• Maximum input current (A): 32
• Input connector type: 2x IEC 60309 32A
• Power cord length (ft.): 10
• Power cord length (m.): 3.05

Output

• Output voltage (V): Depends on input
• Overload protection: Circuit breaker
• Overcurrent protection (each bank, A): 20
• Outlets, # of bank(s): 2
• Outlet(s), total: 18
• Outlet(s), rear: 18
• Outlet type: 2x IEC C19, 16x IEC C13
• Remote individual outlet control: Yes
• Typical transfer time (ms): 8 ~ 12

Management & Communications

• LCD information display: Input voltage (Volts), input frequency (Hz), current level (Amps), power consumption (Kilowatts), network information, serial number, environment status, hardware version, firmware version
• Hot-swappable LCD module: Yes
• LCD setting & control: Preferred source, source configuration, load configuration, outlet control, LCD settings, reset/reboot
• LED indicators: Source status, load, Tx/Rx, link, outlet
• Connectivity port: RJ45, RJ45 (for environmental), RJ45 (for serial)
• Environmental sensor supported: Yes
• User-upgradeable firmware: Yes
• Power management software: PowerPanel® Business (recommended for small-medium scale management), PowerPanel® Enterprise (recommended for large scale management)
• Supported protocols: TCP/IP, UDP, DHCP, SNMP v1/v3, HTTP(s), Telnet, SSH, SSL, NTP, SMTP, IPv4, IPv6

Physical

• Installed rack height (U): 2
• Form factor: 2U horizontal rackmount
• Enclosure construction: Steel
• Color: Black
• Cord retention tray: Yes
• IEC receptacle locking: Yes
• External site ground pin: Yes
• Adjustable mounting brackets: 1 set

Physical Size

• Dimensions (WxHxD) (in.): 17.05 x 3.5 x 9.3
• Dimensions (WxHxD) (mm.): 433 x 88 x 236
• Weight (lbs.): 18.3
• Weight (kg.): 8.3

Environmental

• Operating temperature (°F): 32 ~ 113
• Operating temperature (°C): 0 ~ 45
• Operating relative humidity (non-condensing, %): 0 ~ 95
• Operating elevation (feet/meters): 0-13,123 feet (0-4,000 meters)
• Storage temperature (°F): 5 ~ 131
• Storage temperature (°C): -15 ~ 55
• Storage relative humidity (non-condensing, %): 0 ~ 95
• Storage elevation (feet/meters): 0-49,213 feet (0-15,000 meters)

Certifications

• Certifications: CE, FCC Class A, UL60950, EN 55032 Class A
• RoHS: Yes