ePMP Force 300-13 SM EU cord

Wireless service providers and enterprises around the globe are challenged to deliver reliable connectivity in overcrowded RF environment. As spectrum increasingly becomes a scarce commodity, finding the right broadband connectivity solution is vital for all low and high density types of deployments.

The ePMP Force 300-13 is a powerful yet affordable subscriber module compatible with the ePMP 3000 Access Point and using the forward compatibility features also interoperates with the ePMP 2000 to ease the migration into the 802.ll ac Wave 2 technology.

The ePMP Force 300-13 has a 13 dBi integrated antenna with a narrow beam width. The ePMP Force 300-13 is the most affordable 802.11AC Wave 2 subscriber module. Its 13 dBi integrated antenna makes it perfect for customers who are near a tower and demand the high-speed internet packages only available on AC wave 2 products.

Features:

• The ePMP Force 300-13 is designed to operate in high interference environments and provides throughput of up to 600 Mbps of real user data.
• The ePMP Force 300-13 supports channel sizes from 20 MHZ up to 80 MHz and modulations upto 256 QAM
• The ePMP Force 300-13 supports real time spectrum monitoring without degration in throuput
• Configurable Modes of operation ensure robust adaptivity to both symmetrical and asymmetrical traffic while providing high performance and round-trip latency as low as 3 – 5 ms.
• QoS management offers an outstanding quality for triple play services – VoIP, video and data and provides three levels of traffic priority.
• The integrated 13 dBI panel antenna has a small form factor and provides excellent range.
• Installation is a breeze for pole and wall mounting.

Spectrum

• Channel Spacing: Configurable on 5 MHz increments
• Frequency Range: 4910 – 5970 MHz
• Channel Width: 20, 40, 80 MHz

Interface:

• MAC (Media Access Control) Layer: Cambium
• Physical Layer: 802.11ac Wave 2 (2×2 MIMO/OFDM)
• Ethernet Interfaced: 10/100/1000 BaseT, Compatible with Cambium PoE & Standard PoE pinouts
• Protocols Used: IPv4/IPv6 (Dual Stack), UDP, TCP, ICMP, SNMPv2c, NTP, STP, IGMP, SSH
• Network Management: IPv4/IPv6, HTTPs, SNMPv2c, SSH, Cambium Networks CnMaestro(TM)
• VLAN: 802.1Q with 802.1p priority

Perfomance

• ARQ: Yes
• Nominal Receive Sensitivity (w/FEC) (at) 20 MHzChannel: MCS0 = -89 dBm to MCS8 (256 QAM-3/4) = -68 dBm (per chain)Hz
• Nominal Receive Sensitivity (w/FEC) (at) 40 MHzChannel: MCS0 = -87 dBm to MCS9 (256 QAM-5/6) = -66 dBm (per chain MHz
• Nominal Receive Sensitivity (w/FEC) (at) 60 MHzChannel: MCS0 = -84 dBm to MCS9 (256 QAM-5/6) = -61 dBm (per chain
• Modulation Levels (Adaptive): MCS0 (BPSK) to MCS15 (256QAM 5/6)
• Transmit Power Range: 0 to +28 dBm (combined up to the regioanl EIRP limit) (1 dB interval)

Physical

• Surge Suppression: 1 Joule Integrated
• Environmental: IP55
• Temperature: -30°C to +50°C
• Weight: 0,48 kg
• Wind Survival: 180 km/hour
• Dimensions (Dia x Depth): 13 cm x 20,3 cm x 5,4 mm
• Pole Diameter Range: 2,4 cm – 4,1 cm
• Power Consumption: 12Watts
• Input Voltage: Passive POE (30 VDC Nominal); 14-30 VDC range

Security

• Encryption: 128-bit AES (CCMP mode)
• Antenna SPpecifications
• Frequency Range: 4.9 – 5.970 MHz
• Antenna Type: Panel
• Peak Gain: 13 dBi
• 3dB Beamwidth-Azimuth: 30 degrees
• 3dB Beamwidth-Elevation: 28 degree