PTP 670 Connectorized END with AC Supply EU

Service providers, government public safety agencies, and critical infrastructure operators such as utilities and energy companies have experienced massive growth in bandwidth demands for reliable and secure broadband connectivity and backhaul. The nature of these deployments for small-cell backhaul, disaster recovery, video surveillance and Wi-Fi backhaul drive variety of deployment topologies.

Now with the Point-to-Point (PTP) 670 Series solution, Cambium Networks combines best-in- class spectral efficiency and reliability with high-capacity multipoint (HCMP) deployment flexibility. With up to 450 Mbps aggregate throughput, PTP 670 systems let you flexibly, reliably and securely handle todays needs.

Based on our widely deployed, field-proven non-line-of sight (NLOS) technology, PTP 670 wireless Ethernet bridges offer an array of features that give you more capacity, greater operational flexibility, and the highest spectral efficiency in the industry. PTP 670 systems provide 4.9 to 6.05 GHz, multi-band flexibility in a single radio and operate in channel sizes from 5 to 45 MHz.

With Dynamic Spectrum Optimization (DSO), PTP 670 systems are constantly optimizing the channel of operation to maximize link reliability and performance. The systems can provide up to 99.999% availability in virtually any environment, including non-line-of-sight, long-distance line-of-sight, high interference, over water and desert, and through extreme weather conditions. As a result, you can deliver more throughput with less spectrum and less investment in even the most challenging environments.

With the PTP 670, operators now have the flexibility to deploy not only in Point to Point topologies but also in High-Capacity Multipoint (HCMP) Applications. HCMP allows for up to 8 remote nodes to connect to a single master radio opening up new deployment models that enable rapid deployment, simplify planning and by using the same hardware regardless of topology a rapid return on investment in equipment and training. Whether your organization is an enterprise, government agency, or service provider, PTP 670 systems are ideal solutions for a wide array of applications such as T1/E1 and fiber replacements or extensions; video surveillance backhaul; LTE, macro-cell, and small-cell backhaul; last-mile access; disaster recovery; network redundancy; and building-to-building campus connectivity.

Radio Technologie

• Channel sizes: 5, 10, 15, 20, 30, 40, and 45 MHz channels. Channel sizes depend on individual country regulations.
• Channel selection: By Dynamic Spectrum Optimization or manual intervention; automatic selection on start-up and continual self-optimization to avoid interference.
• Spectral efficiency: 10 bps/Hz maximum
• Max. transmit power: Up to 27 dBm at BPSK; up to 23 dBm at 256 QAM
• System gain: Integrated: Up to 164 dB with 20 MHz channel and integrated 23 dBi antenna; varies with odulation mode, channel size, and spectrum.
• Connectorized: Varies with modulation mode and antenna typeReceiver sensitivity: -95 dBm with 5 MHz channel
• Modulation/error correction: Fast Preemptive Adaptive Modulation featuring 13 modulation/FEC coding levels ranging from BPSK to 256 QAM dual payload MIMO
• Duplex scheme: Synchronized Time Division Duplex (TDD) and Half Duplex Frequency Division Duplex (HD-FDD); dynamic or fixed transmit/receive ratio; each TDD-synchronized link requires a Cambium TDD-SYNC synchronization unit5 to provide an accurate timing reference signal.
• Antenna: Connectorized: Can operate with a selection of separately-purchased single- and dual-polarity antennas through 2 x N-type female connectors (local regulations should be checked prior to purchase)
• Range: Up to 250 km
• Security: FIPS-197 compliant 128/256-bit AES Encryption (optional); HTTPS and SNMPv3; Identity-based user accounts; Configurable password rules; User authentication and RADIUS support; Event logging and management; optional logging via syslog; Disaster recovery and vulnerability management.

Ethernet Bridging

• Protocol: IEEE 802.3
• User data throughput: Dynamically variable up to 450 Mbps; Maximum conditions – 2×2, 45 MHz channel1, 256 QAM
• Latency: 1 – 3 ms one-direction latency
• QoS: 8 Queues
• Packet classification: Layer 2 and Layer 3 IEEE 802.1p, MPLS, Ethernet priority
• Packet performance: Line rate >900K packets per second
• Timing transport: Synchronous Ethernet, IEEE 1588v2
• Frame support: PTP Mode: Jumbo frame up to 9600 bytes; HCMP Mode: 2000 bytes per frame; Flexible I/O; 2 x Gigabit Ethernet copper ports: Gigabit Port 1: Data + PoE power input; Gigabit Port 2: 802.3at PoE output port; SFP port (single-mode fiber, multi-mode fiber, and copper Gigabit Ethernet options available)
• T1/E1 TDM support: 8 x T1/E1 TDM module (optional indoor unit), G.823-compliant timing; DC power input (compatible with AC+DC Power Injector output)
• T1/E1 Latency: (one way): 1 – 3 ms typical, depending on range, bandwidth, modulation mode, and number of T1/E1 ports; accurate T1/E1 latency figures can be determined for any given configuration using the Cambium PTP LINKPlanner.

Management & Installation

• LED indicators: Power status, Ethernet link status, and activity on extended-range PoE supply
• Network management: In-band and out-of-band; out-of-band management (OOBM)5
• System management: IPv6/IPv4 dual-stack management support; Web access via browser using HTTP or HTTPS/TLS6 SNMP v1, v2c and v3, MIB-II and proprietary PTP MIB; Cambium Wireless Manager, WM 4.0/SP4 or higher Online spectrum analyzer (no impact on payload traffic or network operation)
• Installation: Built-in audio and graphical assistance for link optimization
• Connection: Distance between outdoor unit and primary network connection – up to 330 feet (100 meters)

Physical

• Dimensions: Connectorized ODU: Width 204 mm, Height 318 mm, Depth 90 mm
• Weight: Connectorized ODU: 3.1 kg including bracket
• Operating temperature: -40 °C to +60 °C including solar radiation
• Dust-water intrusion protection: IP66 and IP67
• Wind speed survival: 322 km/h
• AC Power Injector: This power injector accepts AC input only and is a lower-cost unit that supports 32° to 104° F (0° to 40° C) temperature ranges.
• Power consumption: 30 W maximum (up to 70 W with 802.3at device on auxiliary port)