ALFA Network N2 – 802.11b/g/n Long-Range Outdoor WLAN/AP Router 2.4 GHz with 12 dBi Dual-Polarity Antenna

(AP/Client/Router/WISP/Repeater)

N2 – 802.11b/g/n long-range outdoor AP/CPE, built-in 12 dBi dual-polarity antenna

N2 is a cost effective 802.11n outdoor AP/CPE operating in the 2.4 GHz
band and is also compliant with the IEEE 802.11b/g standard. It has a
built-in 12 dBi dual-polarity antenna with dual Ethernet ports. The N2
support passive PoE allowing easy an installation without any
environmental limitation.

Package contents:

• N2
• Install guide card
• 1x PoE power adapter
• 2x plastic strips

• Model: N2
  
• CPU: Atheros AR7240
  
• Flash: 8 MB
  
• RAM: 32 MB
  
• Interface: 2x RJ45, 1x Reset
  
• Antenna: Integrated 12 dBi antenna
• Output power (dBm):
  • 802.11b
    
    • 1 Mbps, 29 +/- 1.5
    • 2.2 Mbps, 29 +/- 1.5
    • 5 Mbps, 29 +/- 1.5
    • 11 Mbps, 29 +/- 1.5
  • 802.11g
    • 6 Mbps, 29 +/- 1.5
      
    • 24 Mbps, 27 +/- 1.5
      
    • 36 Mbps, 25 +/- 1.5
      
    • 54 Mbps, 24 +/- 1.5
      
• 802.11n
• MCS0, 29 +/- 1.5
• MCS3, 29 +/- 1.5
• MCS8, 29 +/- 1.5
• MCS9, 29 +/- 1.5
• MCS12, 29 +/- 1.5
• MCS15, 29 +/- 1.5
• Sensitivity (dB):
  • 802.11b
    • 1 Mbps, -95
    • 2.2 Mbps, -94
    • 5 Mbps, -92
    • 11 Mbps, -90
  • 802.11g
    • 6 Mbps, -90
      
    • 24 Mbps, -82
    • 36 Mbps, -80
    • 54 Mbps, -75
      
  • 802.11n
    • MCS0, -91
    • MCS3, -83
    • MCS6, -74
    • MCS9, -89
    • MCS12, -80
    • MCS15, -72
• Operation mode:
  • AP
    
  • Client
    
  • WISP
    
  • WDS Bridge
• Software:
  • Site survey
    
  • Bandwidth control
    
  • SNMP v1/v2 support
    
  • Adjustable output power
    
  • Distance adjustment
    
  • Radius (802.1x)
    
• Mounting:
  • Pole mount (standard)
    
  • Adjust angle mount (option)
    
• Size: 27.5 x 9.3 x 4.5 (cm)
  
• Temperature:
• Operating: -30°C ~ 75°C
  
• Storage: -40°C ~ 80°C
  
• Humidity:
• Operating: 5 ~ 95%
  
• PoE required: 12 ~ 24 V *depends on cable length*
  

This product is subject to the GPL v2.

Note:
Please use the unit in Germany with the zone “ETSI” only! In accordance
with the applicable requirements in Germany the radiated power (EIRP of
a wireless device should not exceed 20 dbm (100mW). Please note the
telecommunications law in your respective country.