RG-RAP2200(E) is a wireless Wi-Fi 5 access point / AP router from Ruijie Networks with ceiling or wall mount and full roaming support for seamless transition between APs. The device is equipped with two Gigabit LAN ports, the first of which supports power over 802.3at PoE, Dual Band Wi-Fi 5 2×2 MU-MIMO radio with modulation rates of 400 Mbps in the 2.4 GHz and 867 Mbps in the 5 GHz band.

Key benefits
– Easily expandable Wi-Fi with Reyee Mesh
– (2) 10/100/1000 Mbps LAN
– Support for MU-MIMO, roaming, OFDMA
– High throughput thanks to Wi-Fi 5 and 2×2 MIMO in both bands
Interior
– Power supply via 802.3at PoE and 12V DC connection
– Management via Ruijie Reyee Cloud or web interface

Technical parameters
Wireless features
– Wireless frequency: 2.4 + 5 GHz (dual band)
– WiFi standards:
802.11ac
802.11ac – wave2
802.11n
802.11a
802.11b/g
– MU-MIMO: Yes
– Transmission speed – 5GHz [Mb/s]: 866
– Transmission speed – 2.4GHz [Mb/s]: 400
– Transmission power 2.4GHz [dBm]: 20
– Transmission power 5GHz [dBm]: 20
– Security: WPA-PSK/WPA2-PSK
– 2.4GHz MIMO: 2 x 2
– 5GHz MIMO: 2 x 2
– Antenna type: Built-in
– Internal antennas: 2
– Roaming: Yes
– Antenna gain [dBi]: 2

Connections and interfaces
– LAN speed: (2) 10/100/1000Mbps
– Gigabit LAN: Yes

Power supply
– Power over Ethernet: 802.3at
– PoE type: PoE-In (only)
– Max. Power consumption [W]: 13
– Power supply via plug/terminal: 12V / 1.5A

Physical properties
– Purpose: Indoor
– Buttons: Reset
– Operating temperature [°C]: 0 to 40
– Weight [g]: 450
– Width [mm]: 194
– Height [mm]: 35
– Depth [mm]: 194

Software
– Operating mode:
AP Router
Access Point
– Default IP address: Dynamic from DHCP, 10.44.77.253
– Default login and password: Set by the user when switching on for the first time