MiniKom EasyF Multi-range amplifier 4 inputs: VHF-VHF-UHF-UHF

Configurable multi-range amplifier for MATV systems with separate amplification without intermodulation between the inputs.

Equipped with 4 inputs: VHF-VHF-UHF-UHF.

Equipped with an LTE700 filter and an LED signal indicator for immediate detection of network interference.

– Item no.: MVNF440DD2
– Product dataRef.no.: 562422
– EAN13:8424450273272

Description

Highlights
-New compact design (103 mm x 103 mm x 50 mm)
-LED display for SIgnal and remote power supply
-Switchable gain (high/low), and high output level
-Two gain stages for the TV band
-Very low power consumption due to efficient switching power supply
-EasyF connection technology
-Good shielding properties due to the cast housing

Features
-Test output (-30 dB)
-Explanatory product stickers with circuit diagram and setting aids
-ON/OFF switch for DC pass-through at VHF and UHF inputs for remote feeding of mast amplifiers or terr. Antennas with integrated BOSS amplifiers.
– Wall mounting possibleWall mounting possible

Good to know
EasyF connection system: quick and easy

EasyF is an innovative connection concept in which the inner conductor of the coaxial cable is inserted directly into the device, which improves the reliability of the connection. Without the F connectors, the chassis can be reduced and the connection of two cables can be secured with a single screw.

-Time saving: Quick installation is possible as a connector does not have to be fitted to the coaxial cable first. In addition, the connectors do not need to be screwed to the device, which is sometimes difficult when space is limited.
-Connection reliability: The clamp that holds the cables prevents the coaxial cable from coming loose.
-Cost savings: No additional connections required (neither F nor IEC).
-Space optimisation: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending and make it easier to work in cabinets and registration boxes.
-Very simple three-step installation: To connect the two cables, simply unscrew the front panels and screw them back on:

1. Unscrew the front panel of the distributor to access the connection.
2. Plug in the previously stripped coaxial cables.
3.Close the front panel and screw it tight to ensure the connection.

Learn more about the reliability of EasyF connection technology

With EasyF connections, the connection between the coaxial cable and the device is made using an automated system for contacting the inner conductor without additional solder joints.

-Always as good as new: The service life of the device increases when the portion of the solder that has worn off over time is removed.
-Reduces failure rates that are usually caused by cold solder joints.
-Electromagnetic behaviour optimisation: for high frequencies.
-Our commitment to the environment is reinforced: No environmental pollution from welding and reduced power consumption during production.